New Arrivals

Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon m...

Rare Earth Magnets Size: 5mm Diameter x 2mm Height

"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) S...

Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes...

Haltech Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Alle...

Haltech Driveshaft Split Collar 2.125" / 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 All...

Haltech Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magn...

Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Thermal Paste - Suits all OEM ignition Igniters

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins.

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78")

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78")

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78")

LS1 Coil with built-in Ignitor Includes: Matching plug and pins.

High Output Inductive Coil Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must be used with an i...

High Output IGN-1A Inductive Coil with built-in ignition module Includes: Matching plug and pins.

High Output CDI Coil Includes: Matching Delphi plug and pins.

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Includes: Matching plugs and pins.

Boost Control Solenoid 3 Port 33Hz Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S ...

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

Analogue Output Adaptor Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Nissan Attesa 4WD TPS Adaptor Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Tacho Output Adaptor Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO ...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit

Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec Includes: - includes 2 sensors

Haltech Tyre Cover Includes: 1 x Tyre Cover7 x Mounting Suction Caps Notes: Top: Polyester  Internal: Chemical Fibre Cotton Bottom: Aluminium Film...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...

Haltech Premium "Skull" T-Shirt  Suits: Unisex. Traditional fit. Notes: Its all in the details. These unique, custom made garments are for those wh...