All Products

SurLok Connector Set - 200A (Black + Red) Suits: NEXUS R5 Includes: 1 x 200A Red SurLok Connector 1 x 200A Black SurLok Connector

SurLok Connector-120A (Red) - Suits Nexus PD16 Suits: Nexus PD16 Includes: 1 x 120A Red SurLok Connector

  Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application using a capable aftermarket ECU. Simple ...

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

T51R Mod compressor cover will give your turbocharger the classic jet spool/whistle sound. Description T51R MOD FAQ 1. Does this mod help my turbo ...

Tacho Output Adaptor Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO ...

Universal 3" (76mm) Clamp-On Polyurethane Tapered Pod Filter PART NUMBER: AF2811-3003.8.9" (226mm) High x 6.15" (156mm) Base O.D x 4.6" (117mm) To...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B Suits: Elite Series or Platinum Series ECUs Includes: Eight Chann...

TCA-8 Eight Channel Thermocouple Amplifier Suits: Elite and NEXUS Series ECUs only Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4...

TCA2 - Dual Channel Thermocouple Amplifier (CAN ID - Box A) Outputs: CAN and 0-5 V analogue outputs. Includes: Dual Channel Thermocouple Amplifier,...

TCA2 - Dual Channel Thermocouple Amplifier (CAN ID - Box B) Outputs: CAN and 0-5 V analogue outputs. Includes: Dual Channel Thermocouple Amplifier,...

TCA2 - Dual Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box A) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box B) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples an...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and...

Bosch sensor measuring Temp and Pressure all in one. 0-10 Bar Pressure Range (0-145 psi) -40deg to 140deg Temperature Range M10 x 1.0 Thread Univ...

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Thermal Paste - Suits all OEM ignition Igniters

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotat...

Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opp...

Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size...

Introducing the Platinum Racing Products Titanium Wheel Nuts, the ultimate choice for Nissan vehicles (and others) with a M12x1.25 thread pitch. Cr...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Toyota 200mm 3.13 Ratio Differential Final Drive Gear Set suit Most Toyota's which run the 200mm Differential.Commonly found in the Toyota Supra J...

It's billet, it comes in all your favourite PRP colours and it will set off any engine bay. What more could you want?! We can’t just make our prod...

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Turbosmart's Vee Port Blow Off Valve Key Chain is the perfect Turbosmart accessory to show off your engineered-to-win style. This key chain is a sc...

Turbosmart Sticker - 200mm x 45mm - White logo no background

Turbosmart Sticker - 350mm x 80mm - White logo no background

Turbosmart Sticker - 600mm x 130mm - White logo no background

Show your Turbosmart pride with this full colour Turbosmart sticker!Currently OUT OF STOCK in the Australia Pacific Region.

Turbosmart Sticker - 350mm x 120mm - Black BackgroundCurrently OUT OF STOCK in the Australia Pacific Region.

Turbosmart Sticker - 600mm x 210mmCurrently OUT OF STOCK in the Australia Pacific Region.

Constant Tension clamps from Turbosmart are designed to compensate for hoses' thermal cycling and deformation, such as silicon hose and rubber. As ...

Constant Tension clamps from Turbosmart are designed to compensate for hoses' thermal cycling and deformation, such as silicon hose and rubber. As ...

Constant Tension clamps from Turbosmart are designed to compensate for hoses' thermal cycling and deformation, such as silicon hose and rubber. As ...

Constant Tension clamps from Turbosmart are designed to compensate for hoses' thermal cycling and deformation, such as silicon hose and rubber. As ...

Constant Tension clamps from Turbosmart are designed to compensate for the thermal cycling and deformation of hoses, such as silicon hose and rubbe...

Constant Tension clamps from Turbosmart are designed to compensate for the thermal cycling and deformation of hoses, such as silicon hose and rubbe...

Constant Tension clamps from Turbosmart are designed to compensate for the thermal cycling and deformation of hoses, such as silicon hose and rubbe...