All Products

Lock-On Valve Core Tool • Large grip for convenient installation and removal of big bore valve cores • 75mm overall length

•1/4" bsp Drain cock

•1/2" bsp Ring drain cock

•1/2" bsp Winged drain cock

•18mm x 1/2" bsp Non return valve

•1/2" bsp 10bar pressure release valve

•1/4" bsp 10bar pressure release valve

•16.5mm x 1/2" bsp Non return valve

It's billet, it comes in all your favourite PRP colours and it will set off any engine bay. What more could you want?! We can’t just make our prod...

Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear...

Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear...

Turbosmart Upgraded Vacuum-operated Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame t...

Turbosmart Upgraded Vacuum-operated Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame t...

Turbosmart Upgraded Vacuum-operated Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame t...

Turbosmart Upgraded Vacuum-operated Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame t...

Turbosmart Upgraded Vacuum-operated Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame t...

268&264/264 Deg adv duration, 10.65mm & 10.20mm/10.20mm lift - Mild enhancment cams for near stock engines. Requires ECU re-tune and KVS56 ...

288&278/278 Deg adv duration, 11.55mm & 11.05mm/11.00mm lift - Racing cams to suit slightly modified VK56-DE engines. Strong torque and mid...

300&290/288 Deg Adv dur 12.55mm & 11.55mm/11.50mm lift. - Racing cams to suit high compression, well modified VK56-DE racing engines. These...

272&264/264 Deg Adv dur 10.70mm & 10.55mm/10.55mm lift - VK56 Stage 1 turbo cams, suits engines designed to run in the 550-750hp range. Req...

282&274/280 Deg Adv Dur 11.50mm & 11.05mm/10.90mm lift - VK56 cams to suit single or twin turbo street / strip or marine applications, requ...

294&288/294 Deg Adv Dur 11.95mm & 11.50mm/11.95mm lift - VK56 cams to suit well built twin turbo drag racing engine, suits E85+, requires K...

All 6Boost manifolds are individually hand made in Australia. They are specifically designed for your application and built around unique "merge co...

Computer-Safe Circuit Tester • Safely tests automotive circuits and on-board computer-controlled electrical systems • Operates from 3-15v • Supplie...

FEATURES • Auto ranging DC Volt Meter • Auto ranging Ohms (resistance) Meter • Audible (beep) continuity detection • Digital LCD display with backl...

• Two tests in one • Checks 6-12 volt system and spark plug test • Voltage check on secondary or high voltage circuits • White light low volt...

  THIS LISTING IS A BRACKET ONLY 1JZ / 2JZ R35 GEN NEXT COIL KIT This new generation coil kit has been completely redeveloped and specifically des...

THIS LISTING IS FOR A BRACKET ONLY 1JZGE / 2JZGE NON VVTI R35 GEN NEXT COIL KIT This new generation coil kit has been completely redeveloped and sp...

  Upgrading to VR38 Coils in your Nissan SR20?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Upgrading to VR38 Coils in your Toyota 1JZ or 2JZ?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Looking for a way to further personalize your engine bay? Why not grab one of our PRP VR38 Coil Dress Up Washer Kits and add a splash of colour to ...

Intake 130lb @35.5mm (1.398") installed height, 270lb @ 11mm. Exhaust 153lb @33.35mm (1.313") installed height, 306lb @ 11mm. Coil bind 21.60mm (.8...

266/266 Degrees advertised duration, 10.00mm/9.25mm lift - Stage 1 EZ-Power cams to suit stock engines. Can use O.E.M. valve springs if boost and R...

274/274 Degrees advertised duration, 10.60mm/10.55mm lift - Stage 2 high lift cams for street and motorsport applications. Superior performance and...

276/276 Degrees advertised duration, 11.00mm/10.97mm lift - 276/276 Degrees advertised duration, 11.00mm/10.97mm lift. Stage 3 racing cams to suit ...

284/290 Degrees advertised duration, 10.60mm/10.57mm lift - Serious race cams to suit drag racing engines using E85 or methanol fuel. The lobe desi...

292/306 Degrees advertised duration, 11.00mm/11.00mm lift - Ultimate race cams for methanol burning pro drag racing motors, 6 second 2000HP+ type b...

274&266/274 Deg. Advert. Duration 10.60mm&10.55mm/10.55 lift - Split lobe design cams, to promote swirl and maximise efficiency. Suits stre...

Intake; 36.75 installed height, 80lb closed pressure. 180lb at 11mm lift. 24mm coil bind height.\nExhaust; 33.75mm installed height, 80lb closed pr...

A must have for any Holden RB30 Single Cam engine build, this uniquely designed gasket is forged to harness the best sealing properties from Compos...

A must have for any Nissan RB25 / RB25 NEO / RB26 / RB30 Twin Cam engine build, this uniquely designed gasket is forged to harness the best sealing...

A must have for any Nissan TB48 engine build, this uniquely designed gasket is forged to harness the best sealing properties from Composite and Sta...

Water Pump Pulley to suit Nissan Skyline R32/R33/R34 RB20/RB25/RB26/RB30 - 4 Groove Serpentine ATI916744