All Products

280/280 Degrees advertised duration. 11.30mm/10.80mm lift - 3S-GTE Turbo cams for all out drag racing. high RPM, 700HP+ turbo.

262/262 Degrees advertised duration. 10.50mm/10.00mm lift - 3S-GTE Turbo cams for serious street performance engines with 400HP turbo.

3SGE 1mm O/S INT F6064

3SGE 1mm Oversize Exhaust Valve F6066

3SGE Altezza 35.50mm Intake Valve F1945P

4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

Designed as a high-performance clamp for applications where a premium no-fail seal is required, Plazmaclamps make pipe plumbing easy! Designed and ...

Part Number: AF400-05-1MBLK Aeroflow 400 series push lock hose is designed for the use with our push-on fittings. Available in black only. For use...

  CUSTOM PRODUCT | MADE TO ORDER: Please allow 8-12 weeks to manufacture this product. Plazmaman Universal Pro Series Intercooler. Standard Spec...

CUSTOM PRODUCT | MADE TO ORDER: Please allow 8-12 weeks to manufacture this product. Plazmaman Universal Pro Series Intercooler Standard Specifi...

  CUSTOM PRODUCT | MADE TO ORDER: Please allow 8-12 weeks to manufacture this product. Plazmaman Universal Pro Series Intercooler Standard ...

The Aeroflow Performance external wastegate bag / blanket range provides high quality material selection, design, and construction, whilst at an af...

The Aeroflow Performance external wastegate bag / blanket range provides high quality material selection, design, and construction, whilst at an af...

Part Number: AF9552-1001 Aeroflow Performance wastegates are especially designed to maintain set boost levels to protect your engine from ...

CUSTOM PRODUCT | MADE TO ORDER: Please allow 8-12 weeks to manufacture this product. Plazmaman Universal Pro Series Intercooler Standard Spec...

Genuine TI Automotive / Walbro 460LPH Fuel Pump to suit Unleaded & E85 in tank applications. Comes with installation kit including fuel pump, w...

Walbro 460LPH In Tank Fuel Pump to suit standard unleaded fuels & E85. This kit includes the fuel pump, wiring harness & pickup filter. The...

Dual Ceramic ball bearing system provides optimal turbo response &better durability by reducing the shaft-motion 9 Blade PTG-Aero Billet Compr...

262/266 Degrees advertised duration. 8.25mm/8.25mm lift - Turbo cams with reduced overlap to suit street and race applications

290/282 Degrees advertised duration. 10.30mm/10.10mm lift - Rally cams to suit big valve head, increased compression etc.

300/294 Degrees advertised duration. 10.50mm/10.25mm lift - Race cams to suit professionally built competition engines.

318/304 Degrees advertised duration. 11.00mm/10.10mm lift - All motor drag race or single seater circuit car cams.

272/280 Degrees advertised duration. 10.00mm/10.00mm lift - Turbo cams for all out drag racing.

266/262 Degrees advertised duration. 8.59mm/8.20mm lift - Fast street cams, can run stock ECU.

284/278 Degrees advertised duration. 9.20mm/8.50mm lift - Rally cams for great midrange power.

298/288 Degrees advertised duration. 9.52mm/9.15mm lift - Race cams to suit increased compression, ported head etc.

314/308 Degrees advertised duration. 10.00mm/9.35mm lift - Full race cams to suit single seater or sports car.

264/264 Degrees advertised duration. 8.20mm/8.15mm lift - Stage 1 high performance cams for a fast street car with a stock engine.

270/270 Degrees advertised duration. 8.70mm/8.65mm lift - Rally cams for great power gains across the entire RPM range in mildly tuned engines.

284/278 Degrees advertised duration. 9.30mm/8.50mm lift - Racing cams to suit slightly modified engines. These cams can run VVT or use adjustable g...

290/284 Degrees advertised duration. 10.00mm/9.95mm lift - Racing cams for well optimised engines, great with 7A short block. These cams are not fo...

302/290 Degrees advertised duration. 10.50mm/10.00mm lift - Racing cams to suit high compression, high RPM professionally built competition engine ...

264/264 Degrees advertised duration. 8.20mm/8.20mm lift - Turbo cams specifically designed for turbocharged 4A-GE 20V engines. These cams can use V...

80lb 33.85 Installed height, 168lb @10mm -

PRP Toyota 4AGE 16V distributor block off. Your performance built 4AGE engine probably doesn’t need its distributor and leads, instead of using an ...

43lb seat pressure at 35.00mm. Coil Bind is at 22mm - TOYOTA 4A-GE. 'Drop In' PACALOY Valve spring set to suit OEM retainers. 43lb seat pressure at...

Installs at 36.6mm to give 58lb seat pressure. - TOYOTA 4A-GE 20 Valve, High Performance valve spring set. 58lb seat pressure at 36.60mm installed ...

85lb seat pressure at 34.2mm. 185lb at 11.5mm valve lift. - MITSUBISHI 4B11T EVO X. 'PACALOY' Beehive valve spring set with titanium retainers. Thi...

264°/252° | 10.00mm/9.30mm Valve Lift - 264° performance cams for improved low to mid-range power and good throttle response. Ideal for 54mm-60mm t...

270°/262° | 11.00mm/10.00mm Valve Lift - 270° high performance camshafts to suit most motorsport applications. Suits 58mm-66mm turbo running the 35...

278°/272° | 11.50mm/11.00mm Valve Lift - 278° racing cams to suit high horsepower engines running a 64mm-72mm turbo. Great with E85. Kelford Cams r...

282°/288° | 11.50mm/11.00mm Valve Lift - 282°/288° drag racing cams for professionally built engines with a well prepared cylinder head. Fuel type ...

260°-254°/262° | 10.00mm-9.75mm/10.00mm Valve Lift - 260° performance cams to suit rally engines fitted with a 36mm restrictor. Suits engines runni...

OD: 11.05mm. ID: 5.45mm. - Exhaust valve guide for Mitsubishi 4B11T EVO X. OD: 11.05mm. ID: 5.45mm. Set of 8. \nHigh quality precision machined. Ma...

OD: 11.05mm. ID: 5.45mm. - Intake valve guide for Mitsubishi 4B11T EVO X. OD: 11.05mm. ID: 5.45mm. Set of 8. \nHigh quality precision machined. Mad...

75lb seat pressure at 35.0mm. 175lb at 11.5mm valve lift. - MITSUBISHI 4B11T EVO X. High performance 'PACALOY' valve spring set to suit the OEM ret...