Products

If you would like to customize your titanium hardware for these cam gears, all our hardware can be purchased separately through our other listings!...

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

HYPERTUNE THROTTLE BODY SIZES -77mm-90mm-102mm*CUSTOM COLORS (Blue, Purple, Gold, Teal, Red, Green). PLEASE CONTACT US AFTER PLACING YOUR ORDER, TO...

(200mm / 8") • Scale & Vernier - Satin Chromed • Graduation 0.02mm/0.0001" • Upper Locking Screw • 4-way measurement Inside, outside, step &...

0-60mm Disc Brake Calipers • Scale & vernier satin chromed • Locking screw • Graduation 0.1mm

• Drum Brake Vernier Callipers • Graduation 0.05mm • Locking Screw • Length of Jaw 150mm • Inside 50-500mm • Outside 0-500mm

0-150mm / 6" Caliper • Graduation 0.02mm / 0.0001" • Stainless Steel • Metric & SAE Reading on Dial • Measuring face Hardened & Lapped

150mm/6” Metric/SAE Digital Vernier Calipers • Stainless Hardened • Power On/Off • Graduation 0.01mm/0.0005”

200mm/8” Metric/SAE Digital Vernier Calipers • Stainless Hardened • Power On/Off • Graduation 0.01mm/0.0005”

Disc Brake Digital Calipers • 0-100/0.4” Disc Brake Digital Calipers • Double Point Jaw • Power On/Off • Graduation 0.01mm/0.0005”

(150mm / 6") • Scale & Vernier - Satin Chromed • 4 way Measuring • Graduation 0.02mm / 0.0001" • Upper Locking Screw

Crank Seal Removal & Installation Kit • Compact puller with unique extracting hooks engage seal for quick removal • Interchangeable sleeves &am...

4pc singles Cam Clamp Set• 4 x Cam Clamp Timing Gear Clamps• 4 x Cam Clamp Bolt Extensions • Use on single, twin and quad cam engines to hold valve...

• 2 x Cam clamp timing gear clamps • 2 x Cam clamp bolt extensions • Use on single, twin and quad cam engines to hold valve timing during belt repl...

If you want the best of the best, you have come to the right place! PRP trigger kits have been fitted around the globe and have been tried and test...

RB Twin CAM Trigger Kit Only with CAS Bracket (TRIGCAMWCAS)Choose CAS Bracket ColorChoose CAM Plate Color Please note, if you choose an optional co...

If you want the best of the best, you have come to the right place! PRP trigger kits have been fitted around the globe and have been tried and test...

1J & 2J JZ Series CAM Trigger Kit with CAS Bracket (JZTRIGCAM) With this new sequential smart coil option on a NON-TURBO head you may need a di...

Platinum Racing Products Cam trigger plate Can't make up your mind what colour you want? We understand. You can buy other options with a new tri...

Camshaft / Crankshaft Seal to suit a wide range of Nissan / Holden enginesNissan CA18Nissan RB20Nissan RB25Nissan RB26Nissan / Holden RB30This kit ...

Camshaft Pulley Remover / Installation Kit • Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt...

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adap...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

Part Number: HT-130048 Use this cord to connect CAN Items such as IC-7, Widebands and more to your 5pin Link G4X ECU.  Suits: Haltech IC-7 Dash, WB...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressu...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button ...

Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button a...

Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button a...

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.