ECU and Electrical

1 AWG Battery Cable (Black) Includes: 1 AWG battery cable black. Made to order in 1m increments. 1m minimum required length. Notes: Made to order ...

1 AWG Battery Cable (Red) Includes: 1 AWG battery cable red. Made to order in 1m increments. 1m minimum required length. Notes: Made to order Leng...

PRP Coil loom to suit 13B or 20B with VR38 Coils.* Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

1AWG Terminated Cable Pair (2m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG batter...

1AWG Terminated Cable Pair (4m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG batter...

1AWG Terminated Cable Pair (6m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG batter...

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

6 Channel Ignition Extension Harness - 1200mm / 47.2" Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-130348 - 6 Channel Igni...

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adap...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Daisy-chain Cable for Haltech Multi-Function CAN Gauge

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Elite 1000-2500 Mazda RX7 FD3S-S7&8 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Mazda RX7 FD3S-S7&8 (...

Elite 1000/1500 Honda Integra DC5 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-...

Elite 1000/1500 Honda OBD-I B-Series Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Honda OBD-I B-Series 92-95 C...

Elite 1000/1500 Mazda Miata (MX-5) NB PlugnPlay Adaptor Harness Suits: Mazda Miata (MX-5) NB ADM Special Edition (Factory Turbo), USDM Special Edit...

Elite 1000/1500 Mitsubishi EVO 1-3 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. M...

Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Nissan 200...

Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Nissan Silvia S13 (CA...

Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Nissan Silv...

Elite 1000/1500 Nissan Silvia S14 S1 "ZENKI" Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Nissan Silvia S14 S1...

Elite 1000/1500 PlugnPlay Adaptor Harness for Honda S2000 Suits: Honda S2000 AP1 (00-04), AP2 (05) non-DBW Includes: PlugnPlay adaptor harness, M...

Elite 1000/1500 Subaru WRX MY93-96 & Liberty RS Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Subaru WRX MY...

Elite 1000/1500 Subaru WRX MY97-98 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Subaru WRX MY97-98 (Australian...

Elite 1000/1500 Subaru WRX MY99-00 Plug n Play Adaptor Harness Suits: Plug n Play replacement of the factory ECU for Subaru WRX MY99-00 (Australian...

Elite 1000/1500 Terminated Ignition Harness for Mazda 13B (IGN-1A) Suits: Elite 1000/1500 Mazda 13B Terminated Engine Harness Notes: This Ignition ...