ECU and Electrical

Elite 750 Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

Elite 750 ECU + Plug and Pin Set Includes: Elite 750 ECU Plug and Pin set to suit

Elite 750 ECU Outputs: Up to 6 injector and 6 ignition. Suits: Universal 1-12 cylinder or 2-3 rotor applications. Includes: Elite 750 ECU, Waterpr...

Elite 750 Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 2 relays, 4 fuses and pi...

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

Elite PRO Direct Plug-in and IC-7 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 ...

Repalcement onboard position and temperature sensor for the Turbosmart eSG Electronic StraightGate and eBG Electronic BoostGate Range. Turbosmart...

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Extension Cable for Haltech Multi-Function CAN Gauge Length: 150cm (5)

Firewall Rubber Wiring Grommet

Firewall Rubber Wiring Grommet

Firewall Rubber Wiring Grommet Includes: 1 x 63.5mm (2.5") Firewall Grommet Notes: Outside Diameter:63.5mm (2.5") Inside Diameter:44.45mm (1.75")

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings.

Supplied Delphi Connector Syltech Datasheet -2x AN6 EFI Barbs (BLK) Extra +16 -Stainless Bracket Extra +15 Flex-fuel content and temperature sensor...

Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

  G4+ THUNDER ECU The Thunder is our biggest, most advanced ECU yet. The Thunder is designed for high end applications requiring maximum performanc...

AtomX Small, but mighty!  The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has ...

A premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. N...

MonsoonX More features, more powerful. The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data...

Advanced tuning features at an affordable price.   The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector...

The XtremeX is one of Link’s premium ECU’s with more inputs, outputs and features.The XtremeX has built in E-throttle and all the advanced feature...

New G5 Voodoo Pro G5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct i...

Turbosmart GenV HE 'Hall Effect Sensor' is a non-contact position sensor, supplied with calibration data for use with all GenV External Wastegates ...

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...

GPS Upgrade. Upgrades non GPS unit to GPS unit.

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Gear Tooth Speed Sensor - GT101 A GT101 Hall ...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Shim Kit to suit GT101 Hall Effect Sensors Sh...

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) S...

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Haltech CAN Adaptor Cable DTM-4 Female Receptacle/Socket to 8 pin Black Tyco Suits: Used to adapt a Platinum series ECU to Elite DTM-4 CAN system.

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 75mm (3")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 150mm (6")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 300mm (12")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 600mm (24")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 1200mm (48")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 1800mm (72")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 2400mm (92")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 3000mm (120")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 3600mm (144")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 150mm (6")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 300mm (12")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 600mm (24")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 900mm (36")