ECU and Electrical

TCA2 - Dual Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box A) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box B) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples an...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and...

Bosch sensor measuring Temp and Pressure all in one. 0-10 Bar Pressure Range (0-145 psi) -40deg to 140deg Temperature Range M10 x 1.0 Thread Univ...

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotat...

Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opp...

Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

PRP is now stocking injector harnesses to suit all your 6 cylinder custom fuel rail needs! Made with high temp MIL standard ETFE coated wires, allo...

  This is a Quality Universal Throttle Position Sensor to suit the entire range of Plazmaman Billet Throttle Bodies which you can purchase through ...

USB Connection Cable Suits: Platinum Sprint, Sport, Pro and Elite range of ECUs Includes: USB A to USB B Cable - 2 meters - USB 2.0 Compliant Note...

USB Connection Cable USB A to USB C Suits: Nexus Series Products with USB-C connection Includes: USB Connection Cable - USB A to USB C Notes: USB2....

Waterproof (Type B) USB Extension Cable for Elite Pro Plug-in ECU / IC-7 Suits: Elite PRO Direct Plug-in ECUs, IC-7 Display Dash Includes: Circular...

Waterproof Elite USB Cap Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps.

Waterproof Elite USB Extension Cable Type B for communication Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Length: 2....

Weld Fitting - Aluminium Suits: Air Temp Sensor - Small Thread.

Weld Fitting - Aluminium Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread.

Weld on Fitting 1/8 NPT - 27 TPI - 6061 Aluminium Includes: 1 x 1/8 NPT Weld on fitting Size: 20.4mm x 13mm

Weld on Shock Sensor Tab - Mild Steel Suits: Haltech Linear Position Sensors Includes: 1 x Weld On Tab Notes: Suits 1/2" Bodied Linear Position Se...

Wi-Fi Antenna Glass Mount 2.4Ghz Suits: NEXUS R5 Includes: 1 x Glass Mount Wi-Fi Antenna. 1.5m lead. Notes: For increasing signal strength when sta...

Wi-Fi Antenna Suits: Nexus Series Includes: 1 x 108mm Stubby Wi-Fi Antenna 2.4Ghz Length: 108mm

Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP supersea...

Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)

Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband ha...

This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or Diesel). The wide band lambda sens...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modifi...

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resisto...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...