ECU and Electrical

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

Adaptor - Brass 1/8" NPTF to 3/8" NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger ti...

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Air Temp Sensor - Large Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Air Temp Sensor - Small Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Air Temp Sensor Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Air Temp Sensor Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading.

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Aluminum Shock Sensor Mounting Nuts - 1/2" -20 Suits: 1/2"-20 Threaded Bolts Includes: 2 x Mounting nuts , 2 x #8-32 / 2 x #10-32 Machine Bolts Not...

Analogue Output Adaptor Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Raceworks 3 Port Boost Solenoid Billet Mounting Bracket. Raceworks have a range of fittings and accessories to assist with mounting sensors, thrott...

Billet sensor manifold to fit 1/8 10NPT sensors, a neat and more accessible way of mounting and plumbing your sensors in the engine bay. Can be use...

BlackBox by Turbosmart is a dedicated electronic wastegate controller with various factory, aftermarket, and Motorsport ECUs. The BlackBox protects...

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

Boost Control Solenoid 3 Port 33Hz Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

Bosch 145 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measur...

Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins an...

Bosch 3 Way Plug Kit

Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

7 way Bosch Style Plug, pin and Boot

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector 6 x Pins 6 x Seals Suits: Bosch DBW Pedal Assembly

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector 6x Plugs 6x Pins Suits: Bosch DBW 68mm/74mm/82mm Throttlebody Assembly

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector Flylead Suits: Bosch DBW 68mm/74mm/82mm Throttlebody Assembly

Description - DF11s Hall effect principle- Suitable for Wheel speed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with AB...

Description - Genuine Bosch mating connector- Jetronic 2-pin Specifications Application and model suitability:- Generic use- Custom applic...

Turbosmart's Kompact EM Valve Solenoid Replacement Suits VR1 And VR4 are the ideal spare for replacing a damaged or worn-out Turbosmart solenoid. C...

Kompact EM BOV VR10 Solenoid Replacement

High-Speed Proprietary Solenoid Replacement for the Multi-Award Winning Kompact EM Range of Plumback & Dual Port Valves.The replacement solenoi...

Replacement Solenoid Suit Turbosmart EM (Electro-Mechanical) ValvesHigh Speed Bullet Solenoid Replacement for the Multi-Award Winning EM Range of P...

Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. The...

Replacement Bullet Solenoid and loom / connector to suit VR29 Kompact EM DualPort and PlumBack valves.