Engine Block Parts

Made in collaboration with Platinum Racing Products, this pump is designed to work with the PRP dry sump kits which you can find by clicking HERE!

Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec Includes: - includes 2 sensors

Platinum Racing Products - "V2" 12 Tooth Crank Trigger kit 'Nissan RB' What separates this kit from other kits on the market? Our kit provides a su...

Introducing the Platinum Racing Products Auxiliary Dry Sump Kit – the ultimate solution for optimizing oil management in your high-performance vehi...

Introducing the Platinum Racing Products Titanium Wheel Nuts, the ultimate choice for Nissan vehicles (and others) with a M12x1.25 thread pitch. Cr...

Universal Dry Sump Drive Mandrel with 19 Tooth HTD Pulley & Shield - 3 Bolt Configuration 3 Bolt Universal Dry Sump Drive Mandrel with 19T Pull...

Universal Oil Return Adaptor (Dry Sump Conversion)

Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

Dual Crimper Set Inc 3 pin removal tools Includes: 2 x Crimpers 3 x Removal tools

Dailey Engineering offers oil pump driven pulleys utilizing a taper grip locking mechanism.  These hub adaptors allow the fitment of the Dailey ran...

Universal Drive Mandrel with Shield – Dual Pulley Running multiple crank driven accessories? Need to run multiple speeds? The Ross Performance Part...

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

Aviaid Flat Mount Oil Pump Spacer Plate Universal Pump Spacer for mounting accessories to the rear of any Aviaid Pump. Manufactured from aerospace...

Dailey Engineering offers oil pump driven pulleys utilizing a taper grip locking mechanism.  Our taper lock pulleys eliminate the need for set scre...

Haltech HC5 - Hydraulic Crimper Suits: 00 AWG to 12AWG cable. Includes:  1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,1...

Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.

It's billet, it comes in all your favourite PRP colours and it will set off any engine bay. What more could you want?! We can’t just make our prod...

Billet sensor manifold to fit 1/8 10NPT sensors, a neat and more accessible way of mounting and plumbing your sensors in the engine bay. Can be use...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) S...

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit

Introducing the Platinum Racing Products Dry Sump Pump Pulleys! As you would expect from PRP we have put some smarts into our new gears and have a...

This dry sump hub drive belt is designed to work with the PRP dry sump kits which you can find by clicking HERE!

Crimping Tool Suits DTM Series Solid Contacts Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Notes:...

Crimping Tool Suits DTP Series Solid Contacts Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool No...

Crimping Tool Suits DT Series Solid Contacts Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping Tool ...

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ F...

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be re...

No matter what sort of flange you may need, Precision Turbo and Engine has got the right part for the job. We carry a full line of turbine inlet fl...

Introducing the Billet Alloy Maximum Advantage AN Spanner from Platinum Racing Products, the ultimate tool for installing fit...

Description: -10 AN Extended Oil Drain Flange Install Kit for Precision Turbo T4 T67 T72 T76 T78 Application: Extended Oil Drain Flange Install Kit...

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

1/2 inch head dowels Anyone fitting half inch head studs to an RB (should be all rb25 and 30 blocks)  They suit OEM replacement also. Need these! ...

Manual Cable Lug Crimping Tool Suits: 1,2,4,6,8 AWG cable Includes: 1 x Manual cable lug crimping toolNotes: Used to crimp large terminals and Sur...