Engine Block Parts

Easy to install tidy billet boost control Mac valve mounts, includes bolt kit and nylon washer

Part Number: AF513-10BLK Black Finish. Suits 400 & 500 Series Hose Size is -10AN Aeroflow's 510 series push lock fittings are a CNC machined ...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Turbosmart's OPR T40 Fitting Kit is the perfect solution for any automotive enthusiast looking for a spare installation piece. Turbosmart's innovat...

The Turbosmart GenV WG60 Actuator Collar Tool is specially designed to make installing and removing Turbosmart actuators easy and efficient. Featur...

Collar Tool Suit PowerPort Blow Off Valve by Turbosmart. Required for servicing and spring changes.Does not suit RacePort or ProPort Valves.

Part Number: AF573-06DBLK Aeroflow's 570 Series PTFE fittings are a CNC machined one piece fitting which provides uninterrupted flow. The purpose d...

Introducing Platinum Racing Products' top-of-the-line Weld-On Threaded Spouts with Cap. The perfect solution for fuel and other sheet metal tanks. ...

M8 x 20mm Zinc plated Countersunk cap bolts (Allen key) and our PRP Billet anodized washers which are available in all of the Platinum Racing Produ...

Introducing Platinum Racing Products' top-of-the-line Weld-On Barb. The perfect solution for fuel and other sheet metal tanks. Crafted from premium...

No matter what sort of flange you may need, Precision Turbo and Engine has got the right part for the job. We carry a full line of turbine inlet fl...

Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flan...

Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

Turbosmart's GenV CG Diaphragm Replacement Tool is designed to replace the diaphragm in Turbosmart Gen-V wastegates much faster and easier. This to...

M6 x 20mm Zinc plated Countersunk cap bolts (Allen key) and our PRP Billet anodized washers which are available in all of the Platinum Racing Produ...

Turbosmart's GenV Collar Tool is designed specifically for Turbosmart's WG45/WG50 HyperGate45 and ProGate50 Actuators, including Turbosmart's ProPo...

The Turbosmart GenV WG38/40 Actuator Collar Tool is specially designed to make installing and removing Turbosmart actuators easy and efficient. Fea...

Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.

Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors ...

Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Rare Earth Magnets Size: 5mm Diameter x 2mm Height

M10 x 1.0 to 1/8 BSPT Adaptor Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 BSPT Adaptor Notes: Use ...

M10 x 1.0 to 1/8 NPT Adaptor Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 NPT Adaptor Notes: Use wi...

Turbosmart’s Locking Collar C Spanner Tool is designed to fit perfectly with Turbosmart's locking collar system, allowing you to easily and securel...

Part Number: AF413-06-05BLK These hose barbs are a simple solution to connect a hose to your vehicle. Applications can include fuel, oil, water, va...

7 way Bosch Style Plug, pin and Boot

1/4" Mild Steel Weld-on Kit Includes: Nut and Ferrule Notes: Compression ferrules are single use and must be replaced when replacing probes.

1/4" Stainless Steel Weld-on Kit Includes: Nut and Ferrule Notes: Compression ferrules are single use and must be replaced when replacing probes.

1/4" Stainless Compression Fitting Kit Includes: Nut and Ferrule Notes: Compression ferrules are single use and must be replaced when replacing pr...

Deutsch 3 Way Plug Kit

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Bosch 3 Way Plug Kit

Deutsch 2 Way Plug Kit

Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins an...

Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

These fittings are designed specifically to go along side our Platinum Racing Products billet cam covers to block off the breather ports if need be...

Introducing the revolutionary Platinum Racing Products Universal -10 ORB to -10 AN fittings with an innovative internal Allen key design.These fitt...

Rebuild and Service Kit to Suit Turbosmart Oil Pressure Regulator (v2), including filter and O-rings. 

Part Number: AF201-06DBLK Aeroflow's 570 Series PTFE fittings are a CNC machined one piece fitting which provides uninterrupted flow. The purpose d...

Firewall Rubber Wiring Grommet

Firewall Rubber Wiring Grommet

Firewall Rubber Wiring Grommet Includes: 1 x 63.5mm (2.5") Firewall Grommet Notes: Outside Diameter:63.5mm (2.5") Inside Diameter:44.45mm (1.75")

O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug.

O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung

Adaptor - Brass 1/8" NPTF to 3/8" NPTF Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger ti...

Part Number: AF411-06-05BLK Female -6AN tube nut end to 5/16" (7.93mm) Straight Hose Barb These hose barbs are a simple solution to connect a hose ...

Welding fitting insures serviceable and durable port for an EGT 1/8 insert with a sufficient thread depth.