Engine Rebuilds

250°/260° at 0.050" | 115° Lobe Separation | .680"/.650" Valve Lift - LS7 drag racing cam. Requires high stall, trans brake or manual shift. Kelfor...

222°/226° at 0.050" | 114° Lobe Separation | .575"/.575" Valve Lift - 5.7-6.2L mild performance upgrade cam. Great all-rounder, fantastic for daily...

244°/254° at 0.050" | 111° Lobe Separation | .630"/.630" Valve Lift - Racing cam for mid-level competition engines using cathedral port heads. Stre...

-

236°/250° at 0.050" | 109° Lobe Separation | .630"/.630" Valve Lift - Racing cam specifically designed for mid-range throttle response in L98-LS3 e...

232°/238° at 0.050" | 112° Lobe Separation | .620"/.620" Valve Lift - The C12 features increased overlap to give great mid-range power while retain...

252°/266° at 0.050" | 111° Lobe Separation | .650"/.650" Valve Lift - Solid roller lifter cam to suit multiple motorsport applications: drift, circ...

262°/270° at 0.050" | 108° Lobe Separation | .660"/.660" Valve Lift - Solid roller lifter cam for 6.0-7.0L+ engines. Suits top street or super seda...

258°/264° at 0.050" | 115° Lobe Separation | .650"/.660" Valve Lift - Solid lifter camshaft for turbo competition engines running launch limiters a...

230°/236° at 0.050" | 112° Lobe Separation | .600"/.600" Valve Lift - The B-12 features increased overlap to give great mid-range power in 6.0-6.2L...

230°/236° at 0.050" | 113° Lobe Separation | .600"/.600" Valve Lift - 6.0-6.2L strong mid-level performance cam for auto or manual transmission. Ke...

222°/226° at 0.050" | 114° Lobe Separation | .575"/.575" Valve Lift - 6.0-6.2L mild performance upgrade cam. Great all-rounder, fantastic for daily...

226°/232° at 0.050" | 114° Lobe Separation | .580"/.580" Valve Lift - 6.0-6.2L Great all-round performance cam upgrade for auto or manual transmiss...

226°/232° at 0.050" | 110° Lobe Separation | .600"/.600" Valve Lift - Designed to improve mid-range throttle response. Great in applications where ...

240°/246° at 0.050" | 117° Lobe Separation | .630"/.630" Valve Lift - Suits professionally built high HP turbo LS engines. Best in large cubic inch...

228°/238° at 0.050" | 116° Lobe Separation | .600"/.600" Valve Lift - 6.0-6.2L blower cam. High performance cam with low overlap for use in superch...

67lb seat pressure at 34.00mm installed height. 140lbs at 9.00mm valve lift. Coil bind at 20.70mm. - KVS71 TOYOTA 1G-GTE High performance 'PACALOY'...

-

242/247 Degrees duration @ 0.050" cam lift, .452"/.439" lift - Club race or rally cam, suits twin 40's, 145HP engine.

216/216 Degrees duration @ 0.050" cam lift, .388"/.388" lift - Mild performance cam, one step up from a GT.

253/253 Degrees duration @ 0.050" cam lift, .430"/.430" lift - Formula Junior single seater cam (between A6 & A8).

248/252 Degrees duration @ 0.050" cam lift, .480"/.480" lift - Rally and race cam, suits well built engine 150-160HP range.

262/262 Degrees duration @ 0.050" cam lift, .470"/.470" lift - Full race cam, suits light car, professionally built high-spec engine.

230/232 Degrees duration @ 0.050" cam lift, .402"/.400" lift - Fast road cam, suits single down draught or twin side draught carbs.

264/264 Degrees duration @ 0.050" cam lift, .485"/.485" lift - Full race cam, suits high compression, light car, close ratio gearbox.

203/207 Degrees duration @ 0.050" cam lift, .341"/ .337" lif - NZ Formula Ford racing camshaft. Measured and logged with ID # for the MSNZ National...

Installed spring pressure is 66lb. - MAZDA B6, BP & BPT. High performance 'PACALOY' valve spring set to suit OEM retainers. Installed spring pr...