Engine Rebuilds

With 15 years of experience developing and testing multiple engine braces to suit different engine models, PRP is proud to release its NEW integrat...

  Ford Barra Platform, our Billet 6061 Cam Cover Kit with integrated coil kit and mechanical fuel pump option. We we have two variants a...

Billet Barra High Volume + Oil Pump. Platinum racing products collaborating with High-speed engineering are happy to offer a new state-of-the-art ...

Made in collaboration with ATI, this TRUE 1500hp rated SFI Approved Harmonic Balancer is EXCLUSIVE to Platinum Racing Products!Having sold and used...

280°-274°/280° | 11.88mm/11.88mm Valve Lift - 280° racing cams to suit well built motorsport engines where high rpm power is important. Suits turbo...

294°/302° | 12.40mm/12.40mm Valve Lift - 294°/302° pro drag racing cams to suit high RPM competition cars. These are to suit a solid lifter convers...

268°-262°/268° | 11.50mm/11.50mm Valve Lift - 268° high performance cams that give great power gains with the stock GT3540 turbo on higher boost, o...

262°-258°/262° | 11.00mm/11.00mm Valve Lift - 262° 'EZ' power cams to suit a near stock engine with OEM valve spring. Good mid-range power gains an...

296°-290°/296° | 12.40mm/12.40mm Valve Lift - 296° drag/roll racing cams to suit competition cars. These still use the OEM hydraulic lifter. Turbo ...

NOTE: SUPERCEEDED TO THE PRP/ ATI 1500 HP VERSION (check other listings for 1500hp version).The patented ATI Super Damper is the only crankshaft da...

TORQUE PLATE to suit any of the Ford Barra DOHC series engines.  Our PRP torque plate is almost essential when boring and honing your block. Made ...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Ford BA 5.4L XR8 Race Series Harmonic Damper ...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** FORD 4.0L SOHC RACE SERIES HARMONIC DAMPER Fe...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Ford BA / BF / FG Harmonic Damper The race-pr...

31mm OD. 3.50mm shim. 25mm skirt. Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity inc...

Atomic Competition Fasteners Head/Main Stud Kits Necessity is the Mother of Invention, or so goes the saying, but we didn't invent head or main stu...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Ford Falcon 1960-70 Inline Six Race Series Ha...

-

242/247 Degrees duration @ 0.050" cam lift, .452"/.439" lift - Club race or rally cam, suits twin 40's, 145HP engine.

216/216 Degrees duration @ 0.050" cam lift, .388"/.388" lift - Mild performance cam, one step up from a GT.

253/253 Degrees duration @ 0.050" cam lift, .430"/.430" lift - Formula Junior single seater cam (between A6 & A8).

248/252 Degrees duration @ 0.050" cam lift, .480"/.480" lift - Rally and race cam, suits well built engine 150-160HP range.

262/262 Degrees duration @ 0.050" cam lift, .470"/.470" lift - Full race cam, suits light car, professionally built high-spec engine.

230/232 Degrees duration @ 0.050" cam lift, .402"/.400" lift - Fast road cam, suits single down draught or twin side draught carbs.

264/264 Degrees duration @ 0.050" cam lift, .485"/.485" lift - Full race cam, suits high compression, light car, close ratio gearbox.

203/207 Degrees duration @ 0.050" cam lift, .341"/ .337" lif - NZ Formula Ford racing camshaft. Measured and logged with ID # for the MSNZ National...

With over a decade of racing experience using the Ford Barra engine the PRP team Acknowledges that the weak link in the engine is the oil pump and ...

This uniquely designed thermostat housing incorporates OEM design and fitment, whilst providing an angle that allows the radiator hose to fit as it...

Athena Solid Fire Ring Head Gasket for BARRA engines, also knows as a Copper Ring Gasket.  Unlike MLS head gaskets, Athena’s Solid Fire Ring gasket...

OD: 10.04mm. ID: 5.97mm. - FORD BARRA 4.0L 6CYL BA FG FALCON Turbo and non Turbo. Intake and exhaust valve guide complete set of 24. \n \nOD: 10.04...

BARRA Billet STEEL BACKING PLATE An absolute must when building any Barra engine, coupled with our billet oil pump gears for the Barra engine this...

This coil kit has been specifically designed as a direct drop-in replacement for the OEM Barra coils that simply cannot handle increased power m...

Brand new Ford Barra FG Rocker Cover (NEW).

IMPORTANT NOTE: This setup is designed to be used with Aftermarket Standalone ECU's. If you want to run OEM ECU We HIGHLY recommend using this k...

Platinum Racing Products billet titanium Intake manifold fasteners are a new addition to our Extensive range of T5 grade titanium and are CNC machi...

Platinum Racing Products billet titanium exhaust manifold fasteners are a new addition to our Extensive range of T5 grade titanium which are CNC ma...

ACL Race Series performance engine bearings are manufactured to exacting tolerances. Micron tolerance machining supported by precision measurement ...

Complete Ford Barra Rocker Cover Gasket KitIncludes: Rocker cover gasket Cam solenoid seals Spark plug seals Garnish seal PCV valve seal

MAKE: FORDEngine: 4.0 BARRA (NC TURBO) TUFF MOUNTS BOLT KIT FOR USE WITH NEW TUFF MOUNTS OR ORIGINAL EQUIPMENT