Haltech

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not b...

500 PSI "TI" Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the ...

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Plug and Pin Set for NEXUS R5 Suits: NEXUS R5 Includes: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position C...

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted...

Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size...

Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Includes: Matching plugs and pins.

LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plu...

Suits: Nexus Series VCU's with internal onboard wideband. Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 4.9LSU O2...

Linear Position Sensor - 1" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modifi...

Linear Position Sensor - 1" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

1AWG Terminated Cable Pair (2m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG batter...

DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S ...

Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

Bosch 145 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measur...

Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opp...

Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotat...

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV1 connectors to the injector breako...

Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

NEXUS R5 Tube Mount Kit - 1.25" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.25" Tube Clamps Notes: Brackets are made from CNC machined...

NEXUS R5 Tube Mount Kit - 1.625" Suits: NEXUS R5 VCU Includes: 1 x Mounting Plate, 2 x 1.625" Tube Clamps Notes: Brackets are made from CNC machin...

Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resisto...

Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78")

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with Multec 2 connectors to the injector b...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV6 connectors to the injector breako...

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

Platinum PRO/Sport GM Plug-in Auxiliary I/O Harness Length: 2.5m (8)

IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8)