Kelford Cams

216/216 Degrees duration @ 0.050" cam lift, .388"/.388" lift - Mild performance cam, one step up from a GT.

230/232 Degrees duration @ 0.050" cam lift, .402"/.400" lift - Fast road cam, suits single down draught or twin side draught carbs.

242/247 Degrees duration @ 0.050" cam lift, .452"/.439" lift - Club race or rally cam, suits twin 40's, 145HP engine.

248/252 Degrees duration @ 0.050" cam lift, .480"/.480" lift - Rally and race cam, suits well built engine 150-160HP range.

262/262 Degrees duration @ 0.050" cam lift, .470"/.470" lift - Full race cam, suits light car, professionally built high-spec engine.

264/264 Degrees duration @ 0.050" cam lift, .485"/.485" lift - Full race cam, suits high compression, light car, close ratio gearbox.

253/253 Degrees duration @ 0.050" cam lift, .430"/.430" lift - Formula Junior single seater cam (between A6 & A8).

OD: 10.04mm. ID: 5.97mm. - FORD BARRA 4.0L 6CYL BA FG FALCON Turbo and non Turbo. Intake and exhaust valve guide complete set of 24. \n \nOD: 10.04...

268°-262°/268° | 11.50mm/11.50mm Valve Lift - 268° high performance cams that give great power gains with the stock GT3540 turbo on higher boost, o...

280°-274°/280° | 11.88mm/11.88mm Valve Lift - 280° racing cams to suit well built motorsport engines where high rpm power is important. Suits turbo...

296°-290°/296° | 12.40mm/12.40mm Valve Lift - 296° drag/roll racing cams to suit competition cars. These still use the OEM hydraulic lifter. Turbo ...

262°-258°/262° | 11.00mm/11.00mm Valve Lift - 262° 'EZ' power cams to suit a near stock engine with OEM valve spring. Good mid-range power gains an...

294°/302° | 12.40mm/12.40mm Valve Lift - 294°/302° pro drag racing cams to suit high RPM competition cars. These are to suit a solid lifter convers...

150lb seat pressure at 38.10mm. 330lb at 12.4mm. Coil bind at 24.5mm. - FORD BARRA 4.0L 6CYL BA FG FALCON Turbo and non Turbo. PACALOY Beehive valv...

100lb at 38.0mm install height. 207lbs at 11.5mm valve lift. Coil bind at 24.4mm. - FORD BARRA 4.0L 6CYL BA FG FALCON Turbo and non Turbo. High per...

95lb seat pressure at 38mm (1.496"), 225lb at 12.00mm valve lift. Maximum lift is 15.00mm - FORD 2000 OHC. Ovate wire, Beehive valve spring and T...

80lb seat pressure AT 38.00mm install height. 185lb at 11.00mm valve lift. Maximum lift 13.00mm - FORD 2000 OHC. (PINTO) High Performance single ...

Installs at 37.70mm to give 76lb on seat Coil bind 24.0mm - KVS250-X Ford 2.3 Litre Ecoboost 'PACALOY' Beehive spring kit \nInstall at 37.70mm (1....

Install at 37.70mm (1.484") to give 76lb closed pressure. Coil bind 24.00mm - Ford 2.3 Litre Ecoboost 'PACALOY' Beehive spring and Titanium Retaine...

31mm OD. 3.50mm shim. 25mm skirt. Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity inc...

Installed at 75lb. Coil bind is at 22.00mm - FORD DURATEC 2.0L. (not suitable for variable valve timing motors) Ovate wire, PACALOY Beehive valve s...

-

90lb seat pressure @ 36.5mm installed height / 193lb @ 11mm lift. Coil bind is 23.6mm - Ford Gen 1 3.5 litre V6 Ecoboost. High performance, progres...

90lb seat pressure @ 43mm installed height / 246 lb @ 13mm lift. Coil bind is 24.5mm - Ford Gen 2 3.5 litre V6 Ecoboost. High performance, progress...

130lb seat pressure @ 39.6mm installed height / 286 lb @ 13mm lift. Coil bind is 24.5mm - Ford Gen 1, 5.0 Litre Coyote V8. High performance, progr...

90lb seat pressure @ 43mm installed height / 246 lb @ 13mm lift. Coil bind is 24.5mm - Ford Gen 2 3.5 litre V6 Ecoboost. High performance, progress...

65lb seat pressure @ 36.5mm installed height / Coil bind is at 22.00mm. - KVS27 Ford Zetec High performance PACALOYtm valve spring set to suit the ...

Installed pressure is 82lb at 32mm (1.260"). Coil bind is at 17mm - FORD 105E-116E. High Performance 'PACALOY' Dual valve spring set to suit racing...

203/207 Degrees duration @ 0.050" cam lift, .341"/ .337" lif - NZ Formula Ford racing camshaft. Measured and logged with ID # for the MSNZ National...

Installed pressure of 67lb at 32mm. Coil bind is at 18mm - FORD 105E-116E & Formula Ford. High Performance single valve spring set to suit OEM ...