Link ECU

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ F...

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be re...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

LSU 4.9 Plug Kit | 101-0127

7 way Bosch Style Plug, pin and Boot

Deutsch 3 Way Plug Kit

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Bosch 3 Way Plug Kit

Deutsch 2 Way Plug Kit

Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins an...

Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Deutsch DTM4 Connector Kit (Male) to create your own looms. DTM4 Male housing. Includes wedgelock and sockets.

Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Recept...