Link ECU

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capaci...

Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Donut style 8mm hole Includes plug and pin kit 

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ F...

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be re...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Mounting bracket for G4+ Thunder.

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flan...

Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.