Link ECU

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Donut style 8mm hole Includes plug and pin kit 

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

Housing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder

Equivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ F...

Housing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)

Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be re...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Mounting bracket for G4+ Thunder.

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flan...

Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.

Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.

Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors ...

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

LSU 4.9 Plug Kit | 101-0127

7 way Bosch Style Plug, pin and Boot

Deutsch 3 Way Plug Kit

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Bosch 3 Way Plug Kit

Deutsch 2 Way Plug Kit