Looms and Electrical

Laser Ride Height Sensor Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective ...

Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec Includes: - includes 2 sensors

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...

iC-7 Sensor Pack For Stand-Alone Installations Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NP...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

This new product is designed and manufactured to move the cam sensor 180 degrees out of the way from the heat of the exhaust manifold and to provid...

The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

2000 PSI Brake/Nitrous Pressure Sensor Includes: Matching Delphi plug and 3 pins.

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...

5 Bar "TI" MAP Sensor Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted di...

7 Bar "TI" MAP Sensor Includes: Matching plug and pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly to...

5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport MAP sensors must not be mounte...

Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins.

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

NTK Wideband Hardware Pack Suits: NEXUS Series devices Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung N...

Replacement Bullet Solenoid and loom / connector to suit VR29 Kompact EM DualPort and PlumBack valves.

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not b...

250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted...

500 PSI "TI" Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the ...

Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size...

Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Linear Position Sensor - 1" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Includes: Matching plugs and pins.

LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plu...

Suits: Nexus Series VCU's with internal onboard wideband. Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 4.9LSU O2...

Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modifi...

Linear Position Sensor - 1" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...