Looms and Electrical

Laser Ride Height Sensor Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective ...

Terminated Engine Harness connects directly to the Nexus R5 VCU and supports most popular big block and small block V8 engines from GM, Ford and Ch...

NEXUS R5 Basic Universal Wire-In Harness 5 Metre Length Suits: NEXUS R5 Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with T...

Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec Includes: - includes 2 sensors

NEXUS R5 Basic Universal Wire-In harness Suits: NEXUS R5 Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire Notes:...

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...

Elite 2500 & 2500 T Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7...

iC-7 Sensor Pack For Stand-Alone Installations Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NP...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Elite 1500 Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and p...

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...

Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...

PART NUMBER: HT-182200 HARNESS OVERVIEW Ideal for modified street cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has ...

Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 2 relays, 4 fuses and pins for the 4 spare power circuits. brings le...

Elite 750 Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 2 relays, 4 fuses and pi...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

Elite 2500 & 2500 T Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

Elite 1500 Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only

1AWG Terminated Cable Pair (6m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG batter...

The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

2000 PSI Brake/Nitrous Pressure Sensor Includes: Matching Delphi plug and 3 pins.

PD16 Flying Lead Harness - 5M Suits: Nexus PD16 Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16 Length: 5M / 16FT

Notes: Does not include fuse and relay box. HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal...

Elite 750 Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only

5 Bar "TI" MAP Sensor Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted di...

7 Bar "TI" MAP Sensor Includes: Matching plug and pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly to...

5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport MAP sensors must not be mounte...

1AWG Terminated Cable Pair (4m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG batter...

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins.

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

NTK Wideband Hardware Pack Suits: NEXUS Series devices Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung N...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.