Looms and Electrical
Tuning Cable (CANSER)
Link ECULink CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...
View full detailsSport to Elite Harness upgrade kit HT-130100
HaltechSport to Elite Harness upgrade kit Includes: 13 Colour-coded 2.5m/8ft wires pre-crimped with pins to suit AMP Superseal Connectors and 2 blanking ...
View full detailsHaltech Elite CAN Cable DTM-4 to DTM-4 HT-130027
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Length: 2400mm (92")
Haltech Elite CAN Cable DTM-4 to DTM-4 HT-130028
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Length: 3000mm (120")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130037
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 2400mm (92")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130038
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3000mm (120")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130039
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3600mm (144")
Haltech Elite CAN Cable DTM-4 to DTM-4 HT-130029
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Length: 3600mm (144")
Coolant Temperature Sensor (NTC12)
Link ECUIncludes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Coolant Temperature Sensor (NTC1-8)
Link ECUIncludes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Tuning Cable (CUSB)
Link ECULink CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...
View full detailsPlug and Pins Only - AMP 34 Pin 4 Row 3 Keyway Superseal Connector HT-030009
HaltechPlug and Pins Only - AMP 34 Pin 4 Row 3 Keyway Superseal Connector Suits: Nexus: PD16, Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the la...
View full detailsDual Core Cable (C2C10)
Link ECUDual core screen cable for use with trigger signals and knock sensors - 10m per pack
T100G4 - 100 pack of terminals
Link ECUTerminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.
Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male HT-011030
HaltechFlex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings.
Waterproof Elite USB Extension Cable Type B for communication HT-070002
HaltechWaterproof Elite USB Extension Cable Type B for communication Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Length: 2....
View full detailsHaltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco HT-040064
HaltechHaltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 2400mm (92")
Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco HT-040065
HaltechHaltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 2400mm (92")
Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco HT-040066
HaltechHaltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 3000mm (120")
Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco HT-040067
HaltechHaltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 3000mm (120")
Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco HT-040068
HaltechHaltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 3600mm (144")
Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco HT-040069
HaltechHaltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 3600mm (144")
Haltech Elite CAN Cable DTM-4 to DTM-4 HT-130024
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Length: 900mm (36")
Haltech Elite CAN Cable DTM-4 to DTM-4 HT-130026
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Length: 1800mm (72")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130034
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 900mm (36")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130035
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 1200mm (48")
Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco HT-130036
HaltechHaltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 1800mm (72")
Haltech Elite CAN Cable DTM-4 to DTM-4 HT-130025
HaltechHaltech Elite CAN Cable DTM-4 to DTM-4 Includes: 1 x DTM-4 to DTM-4 CAN Cable Length: 1200mm (48")
Solid State Relay 100 AMP HT-030202
HaltechSolid State Relay 100 AMP Suits: High frequency PWM control of auxiliary injectors, variable speed fan or pump control etc. Includes: 1K Pull up r...
View full detailseB2 Microswitch
TurbosmartTurbosmart’s eBoost2 is the perfect choice for controlling input in your vehicle, such as gear selection. The Turbosmart microswitch supplied with ...
View full detailsMSTS Series Fast Response IAT (Regular Caged Tip w/ Flyleads) [IAT E15]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...
View full detailsMSTS Series Fluid Temp Sensor (Regular w/ Flyleads) [CLT E20]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...
View full detailsMSTS Series Fluid Temp Sensor (Low Clearance Stub Tip w/ Flyleads) [CST E20]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...
View full detailsMSTS Series Glass Fast Response IAT - Post Cooler (Shallow Position Exposed Glass Tip w/ Flyleads) [EAT G15]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...
View full detailsMSTS Series Glass Fast Response IAT - Pre Cooler (Shallow Position Exposed Glass Tip w/ Flyleads) [EAT G25]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...
View full detailsMSTS Series Glass Fast Response IAT - Post Cooler (Exposed Glass Tip w/ Flyleads) [EAT G15]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...
View full detailsMSTS Series Glass Fast Response IAT - Pre Cooler (Exposed Glass Tip w/ Flyleads) [LAT G25]
SyltechIncludes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...
View full detailsCANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN)
Link ECURequired to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU. Compatible...
View full detailsXS Expansion Loom (XSL)
Link ECUWant to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...
View full detailsCAN Adaptor Loom DTM-4 to 6-pin Circular Connector HT-130047
HaltechCAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...
View full detailsPin Kit D (TKD)
Link ECUHousing and 26 terminals for D connector. Plug and Pin kit only.Suitable for: G4+ Thunder
Pin Kit B (TKB)
Link ECUEquivalent plug and connectors as "B" Loom. Plug and Pin Kit only.Suitable for: Link G4X Storm (Loom A/Pin Kit A also required) Link G4X and G4+ F...
View full detailsPin Kit C (TKC)
Link ECUHousing and 26 terminals for C connector. Plug and Pin Kit Only.Suitable for: G4+ Thunder Obsolete G4 Atom and Lightning. (Not G4+ or G4X Atom)
Pin Kit A (TKA)
Link ECUEquivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for: All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be re...
View full detailsCANEXT - Link CAN Extension Cable 2m
Link ECU2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...
View full detailsCANTEE - Link CAN Splitter Cable
Link ECUCAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...
View full detailsAir Temp Sensor - Small Thread HT-010200
HaltechAir Temp Sensor - Small Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.
Air Temp Sensor - Large Thread HT-010202
HaltechAir Temp Sensor - Large Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.