Looms and Electrical

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

This Custom Made wiring loom by Platinum Racing Products is designed to suit the Ford Barra Engine using VR38 coils from the Nissan GTR R35. The co...

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

  Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application using a capable aftermarket ECU. Simple ...

Upgrading to VR38 Coils in your Toyota 1JZ or 2JZ?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

RB TWIN CAM COIL LOOM to suit the VR38 coilpacks from Nissan R35 GTR* Bench tested, club motorsport grade branded harness, perfectly spaced, high t...

PRP Coil loom to suit 13B or 20B with VR38 Coils.* Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

EVO Sequential loom EVO Batch loom. * Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with Multec 2 connectors to the injector b...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV1 connectors to the injector breako...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV6 connectors to the injector breako...

Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

  Upgrading to VR38 Coils in your Nissan SR20?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

Supplied Delphi Connector Syltech Datasheet -2x AN6 EFI Barbs (BLK) Extra +16 -Stainless Bracket Extra +15 Flex-fuel content and temperature sensor...

Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resisto...

3 Bar GM MAP Sensor Includes: Matching plug and 3 pins.

Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Boost Control Solenoid 3 Port 33Hz Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78")

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78")

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78")

Elite 1000/1500 Terminated Ignition Harness for Mazda 13B (IGN-1A) Suits: Elite 1000/1500 Mazda 13B Terminated Engine Harness Notes: This Ignition ...

MoTeC 'hall effect' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the crankshaft position onlySee our ...

These billet wheel speed sensor adaptors are specifically designed to mount aftermarket Bosch Motorsport abs / active wheel speed sensors for highe...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

Platinum PRO/Sport GM Plug-in Auxiliary I/O Harness Length: 2.5m (8)

IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8)

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 Description: Deutsch DTM Connector Stainless Construction GAUGE Pressure 0 to 10BAR ...

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

We now stock the newest popular model of 3 Port MAC Valves to be able to fine-tune the control of your wastegate diaphragms. These aren't your ave...