Looms and Electrical

Introducing the Ignitor Delete Patch Connector designed specifically for Toyota 1JZ and 2JZ engines with VVTi. This essential component offers a co...

Plug and Pins Only - AMP 26 & 34 Pin 4 Row 3 Keyway Superseal Connector Set Suits: E8/11, PS1000/2000 and Elite 1000-2500 ECUs.

Oil Temperature sensor High Range Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading.

"Red" Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) S...

Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Tacho Output Adaptor Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO ...

Elite PRO Direct Plug-in and IC-7 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 ...

TCA4 - Quad Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

TCA2 - Dual Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

Replacement ZF/ Cherry sensors for PRP 12 tooth Crank Trigger kits. Red sensor please note thread is M12 x 1 Replacement ZF/ Cherry sensors for PR...

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Gear Tooth Speed Sensor - GT101 A GT101 Hall Effect Sensor for use with Ross Performance Parts triggering systems. GT101 Hall Effect Sensor: For u...

MoTeC 'reluctor' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the camshaft position onlySee our other...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit

GPS Upgrade. Upgrades non GPS unit to GPS unit.

Long Nose ‘Fast’ Intake Air Temperature Sensor upgrade for factory RB26 Plenum. Replaces the slow closed element M12 factory sensor with a open cag...

Plug and Pins Only - 32 Pin Tyco Suits: Sprint 500 & RE ECU Platinum Interceptor (non-waterproof version) Includes: Pack of 32 Pins.

6 Circuit Haltech Fuse Box with Lid Includes: Matching pin set. Notes: Does not include relays or fuses.

SurLok Connector Set - 200A (Black + Red) Suits: NEXUS R5 Includes: 1 x 200A Red SurLok Connector 1 x 200A Black SurLok Connector

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Sport to Elite Harness upgrade kit Includes: 13 Colour-coded 2.5m/8ft wires pre-crimped with pins to suit AMP Superseal Connectors and 2 blanking ...

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3600mm (144")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 3600mm (144")

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Plug and Pins Only - AMP 34 Pin 4 Row 3 Keyway Superseal Connector Suits: Nexus: PD16, Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the la...

*THIS LISTING IS FOR 6 x RACEWORKS WIRED HARNESS ADAPTERS - FOR PURCHASE OF LOOSE UNITS, PLEASE CLICK HERE* Racewoorks Nissan Jecs to Bosch Injecto...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings.

Waterproof Elite USB Extension Cable Type B for communication Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Length: 2....

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 2400mm (92")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 2400mm (92")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 3000mm (120")