New Arrivals

  Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application using a capable aftermarket ECU. Simple ...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...

Donut style 8mm hole Includes plug and pin kit 

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...

Description - DF11s Hall effect principle- Suitable for Wheel speed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with AB...

This knock sensor kit is to suit the Nissan RB26 engine. The kit is supplied with the Bosch Knock Sensor, connector kit and an M8 bolt in either s...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Open Caged Caged SS Shell Epoxy El...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Closed SS Shell Epoxy Element -30...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Closed Stub SS Shell Epoxy Element...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set: DTM06-2S & DTM04-2P Descr...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...

Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Optioned DTM Connector Set: DTM06-2...