New Arrivals

Genuine NEW Nissan Fan Hub and Blade to suit RB25 from: R33 GTS / GTST / GTS4 R34 GT / GTT / GT4 Part Numbers: 21082-75T02 + 21060-5L300  

Pull Type Front Cover with Fork and Bearing to suit: R33 GTR R34 GTT Kit consists of: Thrust Bearing Carrier with Bearing Clutch Fork with Pin a...

The HKS Oil Filter has been designed to reduce pressure loss, therefore maintaining pressure in the system for high performance vehicles. This new...

GReddy Oil Filter OX-03 for all Nissan RB engines!Made in Japan by Trust, GReddy OX oil filters are designed for some of the most powerful Japanes...

DESCRIPTION The GKTECH Poly subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a ...

**This listing will fit all variants of R34 Skyline** This is a SLIP OVER decorative piece made from 304 Brushed stainless and is designed to neatl...

Our new range of radiator mounts are the a cost effictive way to wake up your engine bay and freshen up the look around the nose of the vehicle. So...

Genuine Nissan Flywheel Bolt Set suit: Nissan A31 Cefireo RB20DE/T Nissan R32 Skyline RB20DE/T Nissan R33 Skyline RB25DE/T Nissan R34 Skyline RB25...

A must have for any glovebox, neaten up that bundle of receipts/business cards and slot your logbook into this classy A5 Document folder!Featuring ...

New Nissan OEM Lower Radiator Mount Rubbers.**SOLD AS A PAIR**FITS THE FOLLOWING VEHICLES:  R32 Skyline (RB20) R32 Skyline GTR R33 Skyline R33 Sky...

DISCONTINUED ITEM - LIMITED STOCK AVAILABLE! Brand new clutch assembly with sports pedal, direct from Nissan Japan to suit the following vehicles: ...

PLEASE CHECK PART NUMBERS TO ENSURE THIS FITS YOUR APPLICATION/VEHICLE! Brand new clutch or brake pin+clevis, parts numbers are as follows: 01521-...

Brand new ATTESA Mounting Kit from Nissan Japan, this kit is used to fit the factory ATTESA unit in the boot of GTS4 and GTR Skylines and includes ...

Siruda Intake Manifold Gaskets are machined to a VERY high standard, they fit perfectly and provide a super tight seal and is hands down one of the...

Genuine OEM Nissan item,  oil filter Housing block adapter gasket that sits between the oil filter block and the engine block.Application:R31 Skyli...

Haltech Plug N Play ECU kits are finally here, no more guess games for what you need to get started. You have the option of a basic kit, full kit ...

Link ECU Plug N Play ECU kits are finally here, no more guess games for what you need to get started. You have the option of a basic kit, full kit...

TSS Fuel Rail Kits are finally here! No more guess games for what you need to get that 500hp figure. You have the option of a basic kit, full kit o...

TSS Fuel Rail Kits are finally here! No more guess games for what you need to get that 650hp figure. You have the option of a basic kit, full kit o...

High Quality Vintage nismo stickers, designed to replicate the original stickers from the strut brace's. (But of course you can use them anywhere)....

High Quality Vintage nismo stickers, designed to replicate the original stickers you receive when purchasing a brand new Vintage Nismo Gearknob. Th...

DESCRIPTION S/R/Z Chassis Rear Knuckle Bushes (pair), also works with the GKTech V3 chromoly rear HICAS delete bar kit with toe arm mounts. Comes...

Genuine Nissan Gearbox Front Cover Bolt Kit to suit 5 speed manual: R33 GTST - RB25 R34 GTT - RB25 NEO R32 GTR - RB26 R33 GTR - RB26 This kit may...

Siruda MLS Exhaust Manifold Gaskets are machined to a VERY high standard, they fit perfectly and provide a super tight seal and is hands down one o...

Genuine OEM Nissan item, always required when splitting/removing IACV / idle air control valve from inlet manifold. Replacement item for Nissan Sky...

Brand New Nissan OEM Shifter / Lever Assembly / Gear Stick to suit R34 GT / GTT. This assembly comes with bush and boot as pictured.Fits the Follow...

Genuine Nissan Skyline Oil Cap Seal to suit: R32 GTR / GTSt / GTS R33 GTR / GTSt / GTS R34 GTR / GTt / GT Part Number: 15270-D0103  

The Skyline Shed's Front Strut Tower Nut Set is the perfect way to dress up your engine bay and an even better way to bling out your new strut towe...

Genuine Nissan Transfer Case Gear Oil Filter / Strainer Assembly.This unit must be replaced with servicing your transfer case.This kit suits the fo...

Our R34 GT-R Skyline ducted headlight fits GT-R and GT-T The ducted headlight bolts in and comes with all brackets required. Please note that due t...

Brand New Genuine Nissan Front CV Shaft Bolt kit to suit: Nissan Skyline R32 GTS4 - RB25DE/T Nissan Skyline R32 GTR - RB26DETT Nissan Skyline R33 ...

Brand New Genuine Nissan Front and Rear CV Shaft Bolt kit to suit: Nissan Skyline R32 GTS4 - RB25DE/T Nissan Skyline R32 GTR - RB26DETT Nissan Sky...

Brand New Nissan OEM Shifter / Lever Assembly Kit to suit: R33 GTST - RWD R34 GTT - RWD

Brand New Nissan OEM Leather Gear Shift Knob / Gear Knob to suit: R32 GTS / GTST / GTR R33 GTS / GTST / GTR R34 GT / GTT

Brand New Nissan OEM Shifter Circlip to suit the Following Makes and Models: R32 Skyline GTS / GTST / GTR R33 Skyline GTS / GTST / GTR R34 Skyline...

Brand New Nissan OEM Shifter Snap Ring to suit the Following Makes and Models: R32 Skyline GTS / GTST / GTR R33 Skyline GTS / GTST / GTR R34 Skyli...

Brand New Nissan OEM Shifter Socket Wave Washer to suit the Following Makes and Models: R32 Skyline GTS / GTST / GTR R33 Skyline GTS / GTST / GTR ...

The ULTIMATE in pull to push conversion for your Nissan RB turbo transmission, this kit is compromised of Genuine Nissan and Nismo components. A mu...

CLUTCH KIT HAS A LEAD TIME OF 7 BUSINESS DAYS FOR PARTS AND ASSEMBLY The Skyline Shed has worked very closely with one of the best in the busines...

Looking to build a custom tail shaft or simply replacing a damaged yolk?Our Tailshaft Yokes are significantly stronger than the OEM tailshaft units...

Genuine Nissan Item Brand new throttle cable from 200sx S14, this is used in Nissan Skylines when a longer throttle cable is needed such as: Fitti...

Genuine GReddy Intake Manifold Ornament Badge to suit GReddy/Trust intake manifolds and plenums with a badge sizing of 105mm x 20mm. These also sui...

**PRE-ORDER - ETA 4-6 MONTHS** Hand assembled by us at The Skyline Shed is our new range of RB25/30 engines, this combo is designed for street du...