New Arrivals

264°/264° | 9.60mm/9.55mm Valve Lift - 264° Stage 1 NA performance cams to suit near stock TB48DE engines with bolt-on intake and exhaust upgrades....

268&264/264 Deg adv duration, 10.65mm & 10.20mm/10.20mm lift - Mild enhancment cams for near stock engines. Requires ECU re-tune and KVS56 ...

288&278/278 Deg adv duration, 11.55mm & 11.05mm/11.00mm lift - Racing cams to suit slightly modified VK56-DE engines. Strong torque and mid...

300&290/288 Deg Adv dur 12.55mm & 11.55mm/11.50mm lift. - Racing cams to suit high compression, well modified VK56-DE racing engines. These...

272&264/264 Deg Adv dur 10.70mm & 10.55mm/10.55mm lift - VK56 Stage 1 turbo cams, suits engines designed to run in the 550-750hp range. Req...

282&274/280 Deg Adv Dur 11.50mm & 11.05mm/10.90mm lift - VK56 cams to suit single or twin turbo street / strip or marine applications, requ...

294&288/294 Deg Adv Dur 11.95mm & 11.50mm/11.95mm lift - VK56 cams to suit well built twin turbo drag racing engine, suits E85+, requires K...

Intake 130lb @35.5mm (1.398") installed height, 270lb @ 11mm. Exhaust 153lb @33.35mm (1.313") installed height, 306lb @ 11mm. Coil bind 21.60mm (.8...

266/266 Degrees advertised duration, 10.00mm/9.25mm lift - Stage 1 EZ-Power cams to suit stock engines. Can use O.E.M. valve springs if boost and R...

284/290 Degrees advertised duration, 10.60mm/10.57mm lift - Serious race cams to suit drag racing engines using E85 or methanol fuel. The lobe desi...

274&266/274 Deg. Advert. Duration 10.60mm&10.55mm/10.55 lift - Split lobe design cams, to promote swirl and maximise efficiency. Suits stre...

292/306 Degrees advertised duration, 11.00mm/11.00mm lift - Ultimate race cams for methanol burning pro drag racing motors, 6 second 2000HP+ type b...

276/276 Degrees advertised duration, 11.00mm/10.97mm lift - 276/276 Degrees advertised duration, 11.00mm/10.97mm lift. Stage 3 racing cams to suit ...

274/274 Degrees advertised duration, 10.60mm/10.55mm lift - Stage 2 high lift cams for street and motorsport applications. Superior performance and...

Intake; 36.75 installed height, 80lb closed pressure. 180lb at 11mm lift. 24mm coil bind height.\nExhaust; 33.75mm installed height, 80lb closed pr...

This new generation coil kit has been completely redeveloped and specifically designed as a direct drop-in replacement for the L28 Cylinder Heads t...

With the price of genuine Nismo LM GT1 wheels forever going up in price and enthusiasts wanting to restore them to amazing condition we decided an ...

This knock sensor kit is to suit the Nissan RB26 engine. The kit is supplied with the Bosch Knock Sensor, connector kit and an M8 bolt in either s...

This extensive dress up kit includes a variety of Cap Head and Counter Sunk zinc plated bolts, Titanium nuts (Where applicable) and matching PRP Bi...

Introducing the Platinum Racing Products Titanium Wheel Nuts, the ultimate choice for Nissan vehicles (and others) with a M12x1.25 thread pitch. Cr...

Introducing the LMGT1 / LMGT2 Titanium Hardware Upgrade, an exceptional choice for those seeking to improve the performance and appearance of their...

Platinum Racing Products introduces a game-changing drop-in distributor module for Nissan/Datsun L-Series engines. With a hassle-free installation ...

RB 70mm V-Band (Big Daddy)Finally, we can show you one of our most complex designs and just like our RB High Response manifold (Reverse Rotation), ...

This bolt replacement kit is required for the upgrade to a  Platinum Racing Products RB engine block braces. This kit includes high-quality bolts t...

31mm OD. 2.78mm shim. 25mm skirt - 32.02mm-32.33mm base-circleNissan RB26DETT Standard Base-circle, Shim under Bucket DLC Coated Cam Follower. Kelf...

31mm OD. 6.15mm shim. 25mm skirt - 31.42mm base-circleNissan RB26DETT Shim-Less DLC Coated Cam Follower.KCF-182S have a 6.15mm ‘shim’ thickness for...

31mm OD. 3.78mm shim. 25mm skirt - 1.42mm-30.35mm base-circle Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced ...

31mm OD. 6.40mm shim. 25mm skirt - 30.35mm Base Circle Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt....

Introducing the Platinum Racing Products Nissan RB Engine Titanium Hardware Dress Up Kit! This exciting new product is designed to enhance the appe...

Introducing the Platinum Racing Products RB26 Fuel Rail, a high-performance fuel rail designed specifically for the OEM RB26 Intake Manifolds. This...

  Upgrading to VR38 Coils in your Nissan SR20?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Enhance the appearance of your factory RB covers with our custom low-profile oil filler block off, providing the sought-after dry sump cover aesthe...

These cooling system hose kits are designed to suit the R32, R33 and R34 models fitted with the RB26 engines and replace the factory rubber hoses, ...

Upgrading your Intake Manifold on your Nissan RB engine? Then you NEED this product.Eliminating all unnecessary water lines as we all know is a mes...