New Arrivals

Crimping Tool Suits DTP Series Solid Contacts Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool No...

Dual Crimper Set Inc 3 pin removal tools Includes: 2 x Crimpers 3 x Removal tools

We have developed a high quality bolt on high pressure fitting for all Kinsler pumps.This multi purpose fitting has a few handy uses.At the exit or...

iC-7 Standard Dash Mount Suits: Haltech iC-7 Display DashIncludes: 1 x 2.5mm Black Anodized Aluminium BracketNotes: Suits Haltech iC-7 Display Dash

Haltech iC-7 OBD-II Colour Display Dash Suits: Preconfigured to connect directly (via CAN) to most late model vehicles (approx 2008-on) using the ...

iC-7 Tube Mount For tube OD 1.25in (31.75mm) Suits: iC-7 Mounting Brackets (HT-060070 and HT-060071) Includes: 1 x Annodized Dash Tube Mount 2 x Z...

Haltech iC-7 OBDII to CAN Cable Suits: Haltech iC-7 Dash Includes: Cable and Fuse Length: 1400mm / 55in

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

iC-7 Moulded Panel Mount Suits: Haltech iC-7 Display Dash Includes: 1 x iC-7 Moulded Panel Mount- Black Notes: Suits Haltech IC-7 Display Dash Pan...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

Haltech iC 7 Stand-Alone "Classic" Kit Suits: Perfect for old-school hot rods, mechanically injected muscle, carburated classics and everything in...

iC-7 Sensor Pack For Stand-Alone Installations Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NP...

Daisy-chain Cable for Haltech Multi-Function CAN Gauge

Extension Cable for Haltech Multi-Function CAN Gauge Length: 150cm (5)

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adap...

Haltech CAN Keypad 8 button (2x4) Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x D...

Haltech CAN Keypad 15 button (3x5) Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x...

CAN Keypad Label Set Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transpare...

PD16 PDM Suits: Haltech Nexus or Elite Series ECUs Includes: 1 x Haltech PD16 1 x SurLok 120A Connector Red 1 x USB Key 1 x USB-C Cable 1 x USB-C...

PD16 Flying Lead Harness - 5M Suits: Nexus PD16 Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16 Length: 5M / 16FT

PD16 PDM + Plug and pin Set Suits: Nexus or Elite Series ECUs Includes: Haltech PD16 and Plug and Pin Set to suit Notes: The NEXUS PD16 is Haltechs...

PD16 PDM + Flying Lead Harness (5M) Includes: Haltech PD16 and 5M Flying lead Harness

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

O2 Sensor weld-on bung - 303 Stainless Steel Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug.

Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband ha...

Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)

Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modifi...

LSU4.9 Wideband Adaptor Harness LSU4.9 to DTM6 Suits: NEXUS Series devices Includes: 1 x HT-010726 LSU4.9 to DTM-6 Harness Notes: PlugnPlay with NE...

LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plu...

NTK Wideband Adaptor Harness For NEXUS Series Devices Suits: NEXUS Series Devices Includes: 1 x HT-010727 NTK to DTM-6 Harness Length: 1.2M (4ft)

NTK Wideband Hardware Pack Suits: NEXUS Series devices Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung N...

Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP supersea...

Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resisto...

WB2 NTK - Dual Channel CAN O2 Wideband Controller Kit Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable...

O2 Sensor weld-on bung - 6061 Aluminium Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminium Weld On Bung

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 75mm (3")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 150mm (6")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 150mm (6")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 300mm (12")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 300mm (12")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 600mm (24")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 600mm (24")

Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36")

Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 900mm (36")