Valvetrain

90lb seat pressure @ 43mm installed height / 246 lb @ 13mm lift. Coil bind is 24.5mm - Ford Gen 2 3.5 litre V6 Ecoboost. High performance, progress...

65lb seat pressure @ 36.5mm installed height / Coil bind is at 22.00mm. - KVS27 Ford Zetec High performance PACALOYtm valve spring set to suit the ...

Installed pressure is 82lb at 32mm (1.260"). Coil bind is at 17mm - FORD 105E-116E. High Performance 'PACALOY' Dual valve spring set to suit racing...

Installed pressure of 67lb at 32mm. Coil bind is at 18mm - FORD 105E-116E & Formula Ford. High Performance single valve spring set to suit OEM ...

100lb seat pressure. 198lb at 12.0mm valve lift. - TOYOTA G16E-GTS performance beehive valve spring and titanium retainer kit. Remove OEM base and ...

118lb @ 40.40mm Installed height, 238lb @ 11mm, 25.9mm Coil Bind. - KVS99, Harley V-Rod, Beehive spring and Titanium Retainer Kit. 118lb @ 40.40mm ...

Freight Cost $12.00 ea -

70Lb seated @38.0mm, 166lb @11mm lift, Bind @ 24.9mm - "Holden Allytech - KVS39-BT Progressivly wound 'Pacaloy' Beehive Valve spring set with titan...

110lb at 1.700" Install height. Coil bind at 1.115" - HOLDEN ECOTEC V6. High performance Beehive valve spring set. Drop n on stock retainers at 1.7...

Valve Guide - Honda B16/18. Intake 12.06mm O/D 5.45mm I/D

Install at 34mm (1.338") to give 85lb seat pressure. Coil bind is at 18.5mm - HONDA B16A/18C. High Performance dual valve spring set to fit OEM re...

85lb seat pressure at 37.00mm. Coil bind at 20mm - HONDA H22A. Kelford 'PACALOY" premium quality gold nitride, dual valve spring set for use with ...

Install at 95lb seat pressure. Maximum lift is 14.50mm -

Valve Guide - Honda K20 Intake 11.06mm O/D 5.45mm I/D

Valve Guide - Honda K20 Exhaust 11.06mm O/D 5.45mm I/D

85lb on seat at 38.0mm install height, 192lbs at 12.0mm lift. Coil bind at 24.2mm. 13.8mm max lift - KVS279-BT Honda K20C. High performance beehive...

Intake Valve Stem Seal set to suit a wide range of Nissan RB enginesNissan RB20Nissan RB25Nissan RB26This kit includes 12 high quality intake valve...

- Kit containing all the parts to delete the OEM Active Fuel Management / Displacement On Demand system. Required to convert the L76 engine to runn...

160lb at 1.800" installed height. 425lb at 1.125". Coil bind 1.020". - CHEVROLET LS V8. Performance Dual Spring kit. This kit features a PAC 1905 d...

Spring base for 1204X/1209X. - CHEVROLET LS1. Spring base to suit PAC-1204X and PAC-1209X dual springs. Set of 16.

Ti retainer to suit dual spring 1905/1204X/1209X. - CHEVROLET LS1. 16 Titanium retainers to suit the dual springs 1905/1204X/1209X.

Titanium retainer for KVS1518. - CHEVROLET LS1. 16 Titanium retainers to suit the Beehive spring in KVS1518.

- CS8LS1 - CHEVROLET LS1 GEN III timing set. IWIS chain.

-

- CS8LS2 – CHEVROLET LS2 6.0L double row timing set. IWIS chain.

- CS8LS2-SR – CHEVROLET LS single row LS2-LS3 chain Set.

- CS8LS-VE-SR - CHEVROLET LS3 L98 single bolt, single row timing set. Iwis chain.

- CS8LS7 - CHEVROLET LS7 LS3 double row timing set. IWIS chain.

- CS8LS7-SR - CHEVROLET LS7 LS3 single row timing set. IWIS chain.

- CS8LSA – CHEVROLET LSA. 3 bolt, 4 triggers, double row. IWIS chain.

Install at O.E.M 37.00mm (1.456") to give 62lb closed pressure. Coil bind 21.00mm - KVS17 MAZDA L3 2.3 'PACALOY' Beehive spring set. Suits N/A eng...

Install at O.E.M 37.00mm (1.456") to give 84lb closed pressure. Coil bind 24.00mm - KVS17X-T MAZDA L3 2.3 'PACALOY' Beehive spring and Titanium Re...

Install at O.E.M 37.00mm (1.456") to give 84lb closed pressure. Coil bind 24.00mm - KVS17-X MAZDA L3 2.3 'PACALOY' Beehive spring set. Suits high ...

31mm OD. 3.50mm shim. 25mm skirt. Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity i...

- MITSUBISHI 4B11T +1mm oversize exhaust valve. \nHead Diameter: 30mm \nStem Diameter: 5.46mm \nOverall Length: 105.90mm \nTip Length: 2.32mm

- MITSUBISHI 4B11T +1mm oversize intake valve. \nIntake \nHead Diameter: 36mm \nStem Diameter: 5.47mm \nOverall Length: 113.25mm \nTip Length: 4.24mm

OD: 12.06mm. ID: 6.55mm. - Exhaust valve guide for Mitsubishi 4G63 DOHC. OD: 12.06mm. ID: 6.55mm. Set of 8. \nHigh quality precision machined. Made...

OD: 12.06mm. ID: 6.55mm. - Intake valve guide for Mitsubishi 4G63 DOHC. OD: 12.06mm. ID: 6.55mm. Set of 8. \nHigh quality precision machined. Made ...

95lb seat pressure at 38.00mm. Coil bind is at 25.50mm - NISSAN A12-A15. High performance dual valve spring set to suit OEM retainers. This spring ...

70lb seat pressure at 38mm. Coil bind is at 25.50mm - NISSAN A12-A15. High performance 'PACALOY' single valve spring set to suit OEM retainers. Su...

70lb seat pressure at 31.50mm installed height. 165lb @ 21.50mm open height. Coil bind 19.00mm. Maximum valve lift is 11.50mm. - KVS16 NISSAN CA18D...

80lb seat pressure at 34.90mm installed height. 185lb at 23.9mm open height. Suits OEM retainer. - NISSAN KA24DE. High performance PACALOY drop-in ...

90lb seat pressure at 41.2mm, 225lb at 11.00mm lift. Maximum lift 15.00mm - NISSAN L16-L20 (4cyl). High Performance dual valve spring set, for use...

90lb seat pressure at 41.2mm, 225lb at 11.00mm lift. Maximum lift 15.00mm - NISSAN L20-L28 (6cyl). High Performance dual valve spring set, for use...

OD: 10.02mm. ID: 5.95mm. - Exhaust valve guide for Nissan RB20DET and RB25DET. OD: 10.02mm. ID: 5.95mm. Set of 12. \nHigh quality precision machine...

OD: 10.02mm. ID: 5.95mm. - Intake valve guide for Nissan RB20DET and RB25DET. OD: 10.02mm. ID: 5.95mm. Set of 12. \nHigh quality precision machined...

Pre-NVCS. 85lb seat pressure at 36.00mm install height. Coil bind at 22.00mm. - NISSAN RB20DET RB25DET. Fits early heads without NVCS. High perform...

83lb at 30.40mm installed height. 10.50mm max lift. - NISSAN RB25DET with NVCS. High performance single valve spring set. Includes 24 springs and 1...