Wiring Looms and Adaptors

Terminated Engine Harness connects directly to the Nexus R5 VCU and supports most popular big block and small block V8 engines from GM, Ford and Ch...

NEXUS R5 Basic Universal Wire-In Harness 5 Metre Length Suits: NEXUS R5 Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with T...

NEXUS R5 Basic Universal Wire-In harness Suits: NEXUS R5 Includes: 5 x Main ECU connectors 4 x CAN Connectors Fully populated with TXL wire Notes:...

Elite 2500 & 2500 T Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7...

Elite 1500 Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and p...

Elite 750 Premium Universal Wire-in Harness Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 2 relays, 4 fuses and pi...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

Elite 2500 & 2500 T Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

Elite 1500 Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

1AWG Terminated Cable Pair (6m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG batter...

PD16 Flying Lead Harness - 5M Suits: Nexus PD16 Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16 Length: 5M / 16FT

Elite 750 Basic Universal Wire-in Harness Notes: Does not include fuse and relay box. Length: 2.5m (8)

1AWG Terminated Cable Pair (4m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG batter...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

  TO MAKE YOUR OWN CUSTOM HARNESS, PLEASE CHOOSE FROM THE FOLLOWING PRP CONNECTOR OPTIONS: 1. PRP 'Push To Seat' Connectors 2. PRP 'Pull To Seat' ...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

1AWG Terminated Cable Pair (2m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG batter...

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78")

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78")

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78")

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8)

PRP is now stocking injector harnesses to suit all your 6 cylinder custom fuel rail needs! Made with high temp MIL standard ETFE coated wires, allo...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Elite PRO Direct Plug-in and IC-7 Auxilary Connector kit Suits: Elite Pro Plug-in ECUs IC-7 Display Dash Includes: Terminated Harness 1 x AMP 34 ...

TCA4 - Quad Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

TCA2 - Dual Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

GPS Upgrade. Upgrades non GPS unit to GPS unit.

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Sport to Elite Harness upgrade kit Includes: 13 Colour-coded 2.5m/8ft wires pre-crimped with pins to suit AMP Superseal Connectors and 2 blanking ...

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 2400mm (92")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3000mm (120")

Haltech Elite CAN Cable DTM-4 to 8 pin Black Tyco Length: 3600mm (144")

Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 3600mm (144")

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Waterproof Elite USB Extension Cable Type B for communication Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Length: 2....