Products

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...

BlackBox by Turbosmart is a dedicated electronic wastegate controller with various factory, aftermarket, and Motorsport ECUs. The BlackBox protects...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button ...

Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button a...

Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button a...

Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost...

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...

GPS Upgrade. Upgrades non GPS unit to GPS unit.

Haltech CAN Keypad 15 button (3x5) Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x...

Haltech CAN Keypad 8 button (2x4) Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x D...

Haltech Tyco CAN Dash adaptor cable. Female Deutsch DTM-2 to 8 pin Black Tyco Suits: Allows a direct Plug n Play CAN connection of a Haltech IQ3 St...

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only

IO 12 Expander - 12 Channel (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) ...

IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 A...

IO 12 Expander - 12 Channel with Flying Lead Harness Kit (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 A...

IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box A) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analo...

IO 12 Expander - 12 Channel with Plug & Pins Kit (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analo...

IO 12 Expander- 12 Channel (CAN ID - Box B) Outputs: 4 Digital Pulsed Outputs (DPO) 4 Digital Pulsed Inputs (DPI) 4 Analogue Voltage Inputs (AVI) I...

Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator LEDs each. Four additio...

RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8...

SIZE: 52mm (2") SUITS: Haltech Version 2 CAN bus protocol. INCLUDES: 52mm (2") CAN Gauge, gaugeART DTM-style CAN cable - 2.5m (8ft), mounting br...

Part Number: HT-196001 Suits: Nexus Series ECUs & VCUs including Rebel LS Does not support Elite / Platinum / Legacy ECUs Notes: Supports 4L60E...

Nissan Attesa 4WD TPS Adaptor Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

ETS Pro PLUS Nissan Skyline GTR Centre Differential ATTESA Torque Split Controller for R32 R33 R34 with wheel speed sensor inputs on their dedicate...

PD16 PDM + Flying Lead Harness (5M) Includes: Haltech PD16 and 5M Flying lead Harness

PD16 PDM + Plug and pin Set Suits: Nexus or Elite Series ECUs Includes: Haltech PD16 and Plug and Pin Set to suit Notes: The NEXUS PD16 is Haltechs...

PD16 PDM Suits: Haltech Nexus or Elite Series ECUs Includes: 1 x Haltech PD16 1 x SurLok 120A Connector Red 1 x USB Key 1 x USB-C Cable 1 x USB-C...

Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins.

Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you i...

Bundle - Includes 1 x Razor PDM and 1 x 12 Button CAN Keypad.Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Mod...

Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tr...

Bundle - Includes 2 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tradition...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B Suits: Elite Series or Platinum Series ECUs Includes: Eight Chann...

TCA-8 Eight Channel Thermocouple Amplifier Suits: Elite and NEXUS Series ECUs only Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4...

TCA2 - Dual Channel Thermocouple Amplifier (CAN ID - Box A) Outputs: CAN and 0-5 V analogue outputs. Includes: Dual Channel Thermocouple Amplifier,...

TCA2 - Dual Channel Thermocouple Amplifier (CAN ID - Box B) Outputs: CAN and 0-5 V analogue outputs. Includes: Dual Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box A) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

TCA4 - Quad Channel Thermocouple Amplifier (CAN ID - Box B) Outputs: CAN and 0-5 V analogue outputs. Includes: Quad Channel Thermocouple Amplifier,...

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples an...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and...

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.