Products

1 AWG Battery Cable (Black) Includes: 1 AWG battery cable black. Made to order in 1m increments. 1m minimum required length. Notes: Made to order ...

1 AWG Battery Cable (Red) Includes: 1 AWG battery cable red. Made to order in 1m increments. 1m minimum required length. Notes: Made to order Leng...

PRP Coil loom to suit 13B or 20B with VR38 Coils.* Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

1AWG Terminated Cable Pair (2m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG batter...

1AWG Terminated Cable Pair (4m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 4m. 1 x 1 AWG batter...

1AWG Terminated Cable Pair (6m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 6m. 1 x 1 AWG batter...

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

6 Channel Ignition Extension Harness - 1200mm / 47.2" Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-130348 - 6 Channel Igni...

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors

Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins an...

Bosch 3 Way Plug Kit

7 way Bosch Style Plug, pin and Boot

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector 6 x Pins 6 x Seals Suits: Bosch DBW Pedal Assembly

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector 6x Plugs 6x Pins Suits: Bosch DBW 68mm/74mm/82mm Throttlebody Assembly

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector Flylead Suits: Bosch DBW 68mm/74mm/82mm Throttlebody Assembly

Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability. 

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for: G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon

CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adap...

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force G...

CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includ...

CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN ...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Daisy-chain Cable for Haltech Multi-Function CAN Gauge

Deutsch 2 Way Plug Kit

Deutsch 3 Way Plug Kit

Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Recept...

Deutsch DTM4 Connector Kit (Male) to create your own looms. DTM4 Male housing. Includes wedgelock and sockets.

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...