Products

Plugs and Pins Only - Suit Idle Air Control Motor Screw-in Style

Power Relay 30A 5 Pin Suits: Haltech Fuse Box. Notes: No mounting tab.

PRP Coil plugs to suit VR38 Ignition Coils or R33 GTST Series 2, quality replacement item over cracked units or those wishing to customize or repla...

Quad Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plugs and pins.

*THIS LISTING IS FOR ONE CONNECTOR - PLEASE CHOOSE YOUR QUANTITY FROM THE DROPDOWN* Racewoorks Injector Plug/Connector and Pins + Boot to suit our ...

**Choose your ECU model from the dropdown menu** Not required when ordering a powertune dash. All PowerTune Digital dashes come with 1 x cable to ...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

*THIS LISTING IS FOR 6 x RACEWORKS WIRED HARNESS ADAPTERS - FOR PURCHASE OF LOOSE UNITS, PLEASE CLICK HERE* Racewoorks Nissan Jecs to Bosch Injecto...

Software Resource USB KEY - All Products Includes: 1 USB Key and Lanyard

Solid State Relay 100 AMP Suits: High frequency PWM control of auxiliary injectors, variable speed fan or pump control etc. Includes: 1K Pull up r...

Sport to Elite Harness upgrade kit Includes: 13 Colour-coded 2.5m/8ft wires pre-crimped with pins to suit AMP Superseal Connectors and 2 blanking ...

Pins only - Suit Fuses only in the 6 Circuit Haltech Fuse Box -Pack of 10

Pins only - Suit Relays only in the 6 Circuit Haltech Fuse Box -Pack of 10

SurLok Connector Set - 200A (Black + Red) Suits: NEXUS R5 Includes: 1 x 200A Red SurLok Connector 1 x 200A Black SurLok Connector

SurLok Connector-120A (Red) - Suits Nexus PD16 Suits: Nexus PD16 Includes: 1 x 120A Red SurLok Connector

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

TCA2 - Dual Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

TCA4 - Quad Channel Thermocouple Amplifier Flying Lead Harness Notes: Only required if using the optional 0-5 V analogue outputs. Length: 1.5m (3)

Terminals - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is...

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

PRP is now stocking injector harnesses to suit all your 6 cylinder custom fuel rail needs! Made with high temp MIL standard ETFE coated wires, allo...

Terminated Engine Harness connects directly to the Nexus R5 VCU and supports most popular big block and small block V8 engines from GM, Ford and Ch...

USB Connection Cable Suits: Platinum Sprint, Sport, Pro and Elite range of ECUs Includes: USB A to USB B Cable - 2 meters - USB 2.0 Compliant Note...

USB Connection Cable USB A to USB C Suits: Nexus Series Products with USB-C connection Includes: USB Connection Cable - USB A to USB C Notes: USB2....

V8 Ford Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness Suits: A direct Plug n Play solution to add 8 individual high out...

V8 GM/Chrysler Hemi Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil Harness Suits: A direct Plug n Play solution to add 8 individ...

  Upgrading to VR38 Coils in your Nissan SR20?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Upgrading to VR38 Coils in your Toyota 1JZ or 2JZ?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Waterproof (Type B) USB Extension Cable for Elite Pro Plug-in ECU / IC-7 Suits: Elite PRO Direct Plug-in ECUs, IC-7 Display Dash Includes: Circular...

Waterproof Elite USB Cap Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps.

Waterproof Elite USB Extension Cable Type B for communication Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Length: 2....

Wi-Fi Antenna Glass Mount 2.4Ghz Suits: NEXUS R5 Includes: 1 x Glass Mount Wi-Fi Antenna. 1.5m lead. Notes: For increasing signal strength when sta...

Wi-Fi Antenna Suits: Nexus Series Includes: 1 x 108mm Stubby Wi-Fi Antenna 2.4Ghz Length: 108mm

Wideband Adaptor Harness - 400mm Suits: NEXUS Series devices Includes: 1 x DTM-6 to Superseal Pins Harness Notes: Pre terminated with AMP supersea...

Wideband Extension Harness To suit LSU4.9 Length: 1.2M (4ft)

Wideband Harness for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 1.2m wideband ha...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...