The Skyline Shed
The Skyline Shed
298/288 Degrees advertised duration. 9.52mm/9.15mm lift - Race cams to suit increased compression, ported head etc.
264/264 Degrees advertised duration. 8.20mm/8.15mm lift - Stage 1 high performance cams for a fast street car with a stock engine.
284/278 Degrees advertised duration. 9.30mm/8.50mm lift - Racing cams to suit slightly modified engines. These cams can run VVT or use adjustable g...
View full details264/264 Degrees advertised duration. 8.20mm/8.20mm lift - Turbo cams specifically designed for turbocharged 4A-GE 20V engines. These cams can use V...
View full details302/290 Degrees advertised duration. 10.50mm/10.00mm lift - Racing cams to suit high compression, high RPM professionally built competition engine ...
View full details270/270 Degrees advertised duration. 8.70mm/8.65mm lift - Rally cams for great power gains across the entire RPM range in mildly tuned engines.
290/284 Degrees advertised duration. 10.00mm/9.95mm lift - Racing cams for well optimised engines, great with 7A short block. These cams are not fo...
View full details80lb 33.85 Installed height, 168lb @10mm -
43lb seat pressure at 35.00mm. Coil Bind is at 22mm - TOYOTA 4A-GE. 'Drop In' PACALOY Valve spring set to suit OEM retainers. 43lb seat pressure at...
View full detailsInstalls at 36.6mm to give 58lb seat pressure. - TOYOTA 4A-GE 20 Valve, High Performance valve spring set. 58lb seat pressure at 36.60mm installed ...
View full detailsViton, 5.5mm stem, 10.6mm guide O.D, 12.5mm seal O.D - Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Viton.
Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Polyacrylic. - Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Polyacrylic.
Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Viton. - Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Viton.
Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Polyacrylic. - Stem 5.5mm. Guide OD 10.6mm. Seal OD 12.5mm. Polyacrylic.
288/288 Degrees advertised duration. 9.65mm/10.80mm lift - Stage3 Drag Cams, 1200hp+. Great when using alcohol based fuels and big boost. Recommend...
View full details285/280 Degrees advertised duration. 9.65mm/10.60mm lift - Stage2 Cams, suited for built engines running 850-1000hp. Great with aftermarket plenums...
View full details270/268 Degrees advertised duration. 10.3mm/10.15mm lift - Stage1 Upgrade to suit bolt on parts, 550-750hp engines. Must have valve spring upgrade.
90lb seat pressure @ 36.5mm installed height / 193lb @ 11mm lift. Coil bind is 23.6mm - Toyota Mk5 Supra, 3.0l B58 inline 6. High performance, prog...
View full details1mm+ Exhaust 30mm 5.98mm 99.1mm 3.5mm for Toyota 2JZ-GTE -
Installed pressure is 82lb at 32mm (1.260"). Coil bind is at 17mm - FORD 105E-116E. High Performance 'PACALOY' Dual valve spring set to suit racing...
View full details258°/258° | 11.50mm/11.50mm Valve Lift - Easy power drop in cams. Designed to work with stock valve springs on near stock engines. Great with a re-...
View full details266°/274° | 11.50mm/11.50mm Valve Lift - Stage 1 performance cams. Ideal for engines with turbo upgrade 48-54mm, 350-500hp. Requires valve spring u...
View full details276°/286° | 11.50mm/11.50mm Valve Lift - Stage2 street/strip cams. To suit engines with upgraded turbo 54-64mm, producing 500-700hp. Great with eth...
View full details282°/290° | 11.70mm/11.70mm Valve Lift - Drag racing cams suited to high rpm power. Suits professionally built engines. Turbo size 62mm+. Kelford C...
View full details100lb seat pressure. 198lb at 12.0mm valve lift. - TOYOTA G16E-GTS performance beehive valve spring and titanium retainer kit. Remove OEM base and ...
View full details272/272 Degrees advertised duration. 9.60mm/9.60mm lift - 272 Degree cams for strong midrange performance. ECU upgrade required.
298/298 Degrees advertised duration. 10.35mm/9.30mm lift - NZ super stock stage 1 racing cams to suit engines with stock cam buckets.
268/274 Degrees advertised duration. 8.12mm/8.00mm lift - Mild road or jet boat upgrade drop in cams to suit stock valve springs.
286/286 Degrees advertised duration. 9.65mm/9.65mm lift - Racing cams to suit engines with a good exhaust, raised compression, eight throttles etc.
264/264 Degrees advertised duration. 9.36mm/9.36mm lift - 264 Degree mild performance cams. ECU upgrade required.
294/294 Degrees advertised duration. 10.70mm/10.35mm lift - NZ super stock cams to suit fully modified racing engines with 430+HP. Must use shimles...
View full details260/268 Degrees advertised duration. 9.55mm/9.50mm lift - Supercharger cams. Requires ECU upgrade.
270/280 Degrees advertised duration. 9.90mm/9.60mm lift - High Horsepower cams to suit turbocharged engines running big boost and high RPM. Designe...
View full details264/264 Degrees advertised duration. 9.35mm/9.35mm lift - High performance cams for mild turbocharged engines.
80lb seat pressure at 37.0mm install height. 180lb at 12.0mm valve lift. Coil bind at 22.0mm. - TOYOTA 1FZ-FE and NISSAN TB48DE. High Performance '...
View full details67lb seat pressure at 34.00mm installed height. 140lbs at 9.00mm valve lift. Coil bind at 20.70mm. - KVS71 TOYOTA 1G-GTE High performance 'PACALOY'...
View full details- TOYOTA 1GR-FE . Kelford Racing, High performance PACALOY valve spring set for turbocharged and supercharged 1GR-FE engines.
Torque to 45 Inch Pounds "/lb - By using modern CNC machinery and small batch runs with strict QA processes employed at each step in the production...
View full detailsTorque to 45 Inch Pounds "/lb - By using modern CNC machinery and small batch runs with strict QA processes employed at each step in the production...
View full details5.25mm shim. - 31mm OD. 5.25mm shim. 25mm skirt. \n \nKelford’s KCF range of bespoke DLC coated buckets. These buckets are designed with a larger i...
View full details95lb seat pressure at 34.0mm. 185lbs at 11.0mm valve lift. - Toyota 1JZ-GTE high performance 'PACALOY' valve spring set. 'Drop-in' using the OEM re...
View full detailsOD: 11.05mm. ID: 5.97mm. - Intake valve guide for Toyota 1JZ-GTE and 2JZ-GTE. OD: 11.05mm. ID: 5.97mm. Set of 12. \nHigh quality precision machined...
View full detailsValve Guide - Toyota 1UZ Exhaust 11.03mm O/D 5.95mm I/D
Valve Guide - Toyota 1UZ Intake 11.03mm O/D 5.95mm I/D
Plus +1.5mm 30.50mm 5.47mm 95.10mm -
Valve Guide -Toyota VVTI 1UZ Exhaust 10.35mm O/D 5.45mm I/D
Plus 1.5mm 36.00mm 5.48mm 95.05mm -
Valve Guide - Toyota VVTI 1UZ Intake 10.35mm O/D 5.45mm I/D
$500.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}