ECU and Electrical

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Raceworks 3 Port Boost Solenoid Billet Mounting Bracket. Raceworks have a range of fittings and accessories to assist with mounting sensors, thrott...

Billet sensor manifold to fit 1/8 10NPT sensors, a neat and more accessible way of mounting and plumbing your sensors in the engine bay. Can be use...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

Boost Control Solenoid 3 Port 33Hz Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

Bosch 145 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measur...

Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Description - DF11s Hall effect principle- Suitable for Wheel speed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with AB...

Turbosmart's Kompact EM Valve Solenoid Replacement Suits VR1 And VR4 are the ideal spare for replacing a damaged or worn-out Turbosmart solenoid. C...

Kompact EM BOV VR10 Solenoid Replacement

High-Speed Proprietary Solenoid Replacement for the Multi-Award Winning Kompact EM Range of Plumback & Dual Port Valves.The replacement solenoi...

Replacement Solenoid Suit Turbosmart EM (Electro-Mechanical) ValvesHigh Speed Bullet Solenoid Replacement for the Multi-Award Winning EM Range of P...

Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. The...

Replacement Bullet Solenoid and loom / connector to suit VR29 Kompact EM DualPort and PlumBack valves.

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Cherry Hall Effect Sensor with Ross Performan...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...

Coolant Temp Sensor - Large Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Coolant Temp Sensor - Small Thread Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Coolant Temp Sensor Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading.

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S ...

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Turbosmart offers two significant upgrades for their eBoost2 and eBoost Street boost controllers. The 4-port Turbosmart Solenoid Suit takes the per...

If you're looking for a replacement solenoid for your Turbosmart eBoost2 or eBoost Street boost controller, this 3-port solenoid kit is the perfect...

Repalcement onboard position and temperature sensor for the Turbosmart eSG Electronic StraightGate and eBG Electronic BoostGate Range. Turbosmart...

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male Suits: GM Flex Fuel Sensors. Includes: Two fittings.

Supplied Delphi Connector Syltech Datasheet -2x AN6 EFI Barbs (BLK) Extra +16 -Stainless Bracket Extra +15 Flex-fuel content and temperature sensor...

Fuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Gates Thermostat to suit the following RB Engines: RB20 RB25 RB25NEO RB26 RB30Opening Temperature: 77°COD: 64mmGasket IncludedSuits most RB engine...

Turbosmart GenV HE 'Hall Effect Sensor' is a non-contact position sensor, supplied with calibration data for use with all GenV External Wastegates ...

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...