ECU and Electrical

GPS Upgrade. Upgrades non GPS unit to GPS unit.

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Gear Tooth Speed Sensor - GT101 A GT101 Hall ...

**All Ross Performance Parts are made to order and carry a MINIMUM estimated lead time of 4-8 weeks** Shim Kit to suit GT101 Hall Effect Sensors Sh...

GT101 Style High Frequency Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014) S...

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Haltech Driveshaft Split Collar 1.812" / 46mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes...

Haltech Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Alle...

Haltech Driveshaft Split Collar 2.125" / 53.98mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 All...

Haltech Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magn...

iC-7 Sensor Pack For Stand-Alone Installations Suits: iC-7 Semi Terminated Harness - HT-060300 Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NP...

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Includes: Matching plugs and pins.

Donut style 8mm hole Includes plug and pin kit 

Knock Sensor - Genuine Bosch Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins.

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

The motorsport knock sensor designed for a wide frequency precision. Includes compact electronic connector & high-temperature silicone 90Deg b...

CA18 SPECIFIC KNOCK SENSOR CONVERSION KITFor the CA18 blocks that do not have the correct landing pad for the conventional (RB26 Style) Bosch knoc...

RB SPECIFIC KNOCK SENSOR CONVERSION KITFor the RB20, RB25, RB30 and RD28 blocks that do not have the correct landing pad for the conventional (RB2...

This knock sensor kit is to suit the Nissan RB26 engine. The kit is supplied with the Bosch Knock Sensor, connector kit and an M8 bolt in either s...

  The motorsport knock sensor designed for a wide frequency precision. Includes compact electronic connector & high-temperature silicone 90Deg ...

Laser Ride Height Sensor Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deutsch DTM-3 Connector (HT-031001) , protective ...

Linear Position Sensor - 1" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Linear Position Sensor - 1/2" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Linear Position Sensor - 1/2" - 50mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon m...

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plu...

We now stock the newest popular model of 3 Port MAC Valves to be able to fine-tune the control of your wastegate diaphragms. These aren't your ave...

This new product is designed and manufactured to move the cam sensor 180 degrees out of the way from the heat of the exhaust manifold and to provid...

MoTeC 'hall effect' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the crankshaft position onlySee our ...

MoTeC 'reluctor' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the camshaft position onlySee our other...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 Description: Deutsch DTM Connector Stainless Construction GAUGE Pressure 0 to 10BAR ...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction GAUGE Pressure 0 to 10BAR ...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction Sealed GAUGE Pressure 0 to...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction ABSOLUTE (MAP) Pressure 0 ...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction Sealed GAUGE Pressure 0 to...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction ABSOLUTE (MAP) Pressure 0 ...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction ABSOLUTE (MAP) Pressure 0 ...

Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction GAUGE Pressure 0 to 5BAR ...