Looms and Electrical

NTK Wideband Hardware Pack Suits: NEXUS Series devices Includes: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung N...

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

Replacement Bullet Solenoid and loom / connector to suit VR29 Kompact EM DualPort and PlumBack valves.

JMA Automotive billet tail-shaft speed sensor kit to suit R32,33,34 Skyline GTR. Tried and test on multiple Skyline GTRs around Australia. Desi...

Semi Terminated Stand-Alone Harness For iC-7 Display Dash Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminat...

Brand New Genuine Nissan Speed Sensor Kit to suit: R33 GTST 5-Speed Transmission / RB25DET. R34 GTT 5-Speed Transmission / RB25DET.

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.

150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Includes: Matching Delphi plug and 3 pins. Notes: Motorsport Pres...

150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not b...

250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted...

500 PSI "TI" Pressure Sensor Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the ...

Throttle Position Sensor - Motorsport Contactless Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014) Size...

Stainless Steel Single Channel Hall Effect Sensor Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

TMS-4 Tyre Monitoring System Internal Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

TMS-4 Tyre Monitoring System External Sensors Suits: Haltech Nexus and Elite ECUs using NSP and ESP Software Includes: 1 x Haltech TMS-4 Reciever ...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

  TO MAKE YOUR OWN CUSTOM HARNESS, PLEASE CHOOSE FROM THE FOLLOWING PRP CONNECTOR OPTIONS: 1. PRP 'Push To Seat' Connectors 2. PRP 'Pull To Seat' ...

Plug and Pin Set for NEXUS R5 Suits: NEXUS R5 Includes: 1 x AMP 34 Position Connector Key1 1 x AMP 26 Position Connector Key1 1 x AMP 34 Position C...

Linear Position Sensor - 1" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor Includes: Matching plugs and pins.

LSU4.9 Wideband Hardware Pack Suits: NEXUS Series Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung Notes: Plu...

Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs Suits: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: O2 S...

Wideband O2 Sensor NTK LZA08-H5 Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor - modifi...

Linear Position Sensor - 1" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU conn...

Linear Position Sensor - 1" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

DC Motor Driver - DCMD Outputs: 2 Suits: Turbosmart Electronic Wastegates Varex Motors DC Motors Includes: 1 x DC Motor Driver - DCMD 1 x DT02-2S ...

1AWG Terminated Cable Pair (2m) Suits: NEXUS R5 Includes: 1 x 1 AWG battery cable (Red) pre-terminated with SurLok connector. 2m. 1 x 1 AWG batter...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...

This Custom Made wiring loom by Platinum Racing Products is designed to suit the Ford Barra Engine using VR38 coils from the Nissan GTR R35. The co...

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

Turbosmart offers two significant upgrades for their eBoost2 and eBoost Street boost controllers. The 4-port Turbosmart Solenoid Suit takes the per...

4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

Bosch 145 PSI Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measur...

Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and te...

Throttle Position Sensor - Grey CW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opp...

Throttle Position Sensor - Black CCW Rotation 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotat...

Linear Position Sensor - 1" - 100mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon mo...

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Wideband O2 Sensor only - Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector.

3 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)

Upgrading to VR38 Coils in your Toyota 1JZ or 2JZ?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

RB TWIN CAM COIL LOOM to suit the VR38 coilpacks from Nissan R35 GTR* Bench tested, club motorsport grade branded harness, perfectly spaced, high t...

PRP Coil loom to suit 13B or 20B with VR38 Coils.* Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...