Looms and Electrical

EVO Sequential loom EVO Batch loom. * Bench tested, club motorsport grade branded harness, high temp Tefzel wire and crimp joins used ...

Universal 4 Cylinder Coil Loom to suit VR38 ignition coilpacks & aftermarket ecu's * Bench tested, club motorsport grade branded har...

Turbosmart GenV HE 'Hall Effect Sensor' is a non-contact position sensor, supplied with calibration data for use with all GenV External Wastegates ...

Turbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. The...

Kompact EM BOV VR10 Solenoid Replacement

Replacement Solenoid Suit Turbosmart EM (Electro-Mechanical) ValvesHigh Speed Bullet Solenoid Replacement for the Multi-Award Winning EM Range of P...

High-Speed Proprietary Solenoid Replacement for the Multi-Award Winning Kompact EM Range of Plumback & Dual Port Valves.The replacement solenoi...

Turbosmart's Kompact EM Valve Solenoid Replacement Suits VR1 And VR4 are the ideal spare for replacing a damaged or worn-out Turbosmart solenoid. C...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Linear Position Sensor - 1/2" - 250mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Boost Control Solenoid 4 Port Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector set 1 x M6 Is...

  Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application using a capable aftermarket ECU. Simple ...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

  Upgrading to VR38 Coils in your Nissan SR20?Then you need a wiring loom to suit those bad boys, PRP has  made the perfect solution with our c...

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with Multec 2 connectors to the injector b...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV1 connectors to the injector breako...

Plug and Play with Haltech Rebel LS Terminated harness - HT-186500 This sub-harness connects 8 injectors with EV6 connectors to the injector breako...

Linear Position Sensor - 1/2" - 200mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

MoTeC 'hall effect' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the crankshaft position onlySee our ...

These billet wheel speed sensor adaptors are specifically designed to mount aftermarket Bosch Motorsport abs / active wheel speed sensors for highe...

Genuine Nissan Throttle Position Sensor ( TPS ) to suit: R33 GTS (1995 1998) - RB25DE R33 GTST (1995 1998) - RB25DET R34 GT - RB25DE NEO (Automat...

Supplied Delphi Connector Syltech Datasheet -2x AN6 EFI Barbs (BLK) Extra +16 -Stainless Bracket Extra +15 Flex-fuel content and temperature sensor...

Wideband Sensor - Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resisto...

3 Bar GM MAP Sensor Includes: Matching plug and 3 pins.

Linear Position Sensor - 1/2" - 150mm Travel Suits: All ECUs with spare AVI Includes: 1 x Sensor , 1 x Opposing Connector Set Notes: Use of nylon ...

Boost Control Solenoid 3 Port 33Hz Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012)

GPS Speed Input Module Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Inpu...

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead Loom Only Length: 2.0m (78")

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead Loom Only Length: 2.0m (78")

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only Length: 2.0m (78")

Elite 1000/1500 Terminated Ignition Harness for Mazda 13B (IGN-1A) Suits: Elite 1000/1500 Mazda 13B Terminated Engine Harness Notes: This Ignition ...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

If you're looking for a replacement solenoid for your Turbosmart eBoost2 or eBoost Street boost controller, this 3-port solenoid kit is the perfect...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport) Description: Deutsch DTM ...

Elite CAN HUB 4 Port DTM-4Suits: For use with up to three CAN devices.Includes: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (1...

Platinum PRO/Sport GM Plug-in Auxiliary I/O Harness Length: 2.5m (8)

IO 12 Expander Flying Lead Harness Suits: CAN ID - Box A or B Length: 2.5m (8)

PRP is now stocking injector harnesses to suit all your 6 cylinder custom fuel rail needs! Made with high temp MIL standard ETFE coated wires, allo...

Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 Description: Deutsch DTM Connector Stainless Construction GAUGE Pressure 0 to 10BAR ...

If you're looking for a replacement electrical loom and vacuum line/fittings kit for your Turbosmart eBoost2, look no further than the EB2 Re-Loom ...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

We now stock the newest popular model of 3 Port MAC Valves to be able to fine-tune the control of your wastegate diaphragms. These aren't your ave...