The Skyline Shed
The Skyline Shed
216/216 Degrees duration @ 0.050" cam lift, .388"/.388" lift - Mild performance cam, one step up from a GT.
230/232 Degrees duration @ 0.050" cam lift, .402"/.400" lift - Fast road cam, suits single down draught or twin side draught carbs.
242/247 Degrees duration @ 0.050" cam lift, .452"/.439" lift - Club race or rally cam, suits twin 40's, 145HP engine.
248/252 Degrees duration @ 0.050" cam lift, .480"/.480" lift - Rally and race cam, suits well built engine 150-160HP range.
262/262 Degrees duration @ 0.050" cam lift, .470"/.470" lift - Full race cam, suits light car, professionally built high-spec engine.
264/264 Degrees duration @ 0.050" cam lift, .485"/.485" lift - Full race cam, suits high compression, light car, close ratio gearbox.
253/253 Degrees duration @ 0.050" cam lift, .430"/.430" lift - Formula Junior single seater cam (between A6 & A8).
Part number: AR252-4302 ARP 2000 Series 12mm Head Stud Kit to suit Ford XR6 Turbo / BA-FG. Alternate part numbers: AR2524302 252-4302 252 4302
Atomic Competition Fasteners Head/Main Stud Kits Necessity is the Mother of Invention, or so goes the saying, but we didn't invent head or main stu...
View full detailsOD: 10.04mm. ID: 5.97mm. - FORD BARRA 4.0L 6CYL BA FG FALCON Turbo and non Turbo. Intake and exhaust valve guide complete set of 24. \n \nOD: 10.04...
View full details268°-262°/268° | 11.50mm/11.50mm Valve Lift - 268° high performance cams that give great power gains with the stock GT3540 turbo on higher boost, o...
View full details280°-274°/280° | 11.88mm/11.88mm Valve Lift - 280° racing cams to suit well built motorsport engines where high rpm power is important. Suits turbo...
View full details296°-290°/296° | 12.40mm/12.40mm Valve Lift - 296° drag/roll racing cams to suit competition cars. These still use the OEM hydraulic lifter. Turbo ...
View full details262°-258°/262° | 11.00mm/11.00mm Valve Lift - 262° 'EZ' power cams to suit a near stock engine with OEM valve spring. Good mid-range power gains an...
View full details294°/302° | 12.40mm/12.40mm Valve Lift - 294°/302° pro drag racing cams to suit high RPM competition cars. These are to suit a solid lifter convers...
View full detailsPart number: AR999-3901 ARP Custom Age 625+ Head Stud kit to suit Ford BA / FG XR6 CA625. Alternate part numbers: AR9993901 999-3901 999 3901
Part number: AR251-2501 ARP Flywheel Bolts to suit: Ford Duratec 1.8 & 2.0L Ford BA/BF 4.0L Barra Alternate part numbers: AR2512501 251-2501...
View full details31mm OD. 3.50mm shim. 25mm skirt. Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity inc...
View full detailsFord Barra Platform, our Billet 6061 Cam Cover Kit with integrated coil kit and mechanical fuel pump option. We we have two variants a...
View full detailsThis coil kit has been specifically designed as a direct drop-in replacement for the OEM Barra coils that simply cannot handle increased power m...
View full detailsBrand new Ford Barra FG Rocker Cover (NEW).
IMPORTANT NOTE: This setup is designed to be used with Aftermarket Standalone ECU's. If you want to run OEM ECU We HIGHLY recommend using this k...
View full details-
Lightweight Genuine Carbon Fibre Coil Covers with holes enlarged to suit -10 AN fittings. Add Titanium Dress Bolts to complete the look! (8 pcs) In...
View full details203/207 Degrees duration @ 0.050" cam lift, .341"/ .337" lif - NZ Formula Ford racing camshaft. Measured and logged with ID # for the MSNZ National...
View full detailsPart number: AR154-3604 ARP - Head Bolt set to suit Ford 302-351 Cleveland Engines. Alternate part numbers: AR1543604 154-3604 154 3604
Part number: AR154-4204 ARP Head Stud Kit to suit Ford 302-351 Cleveland Engines. Alternate part numbers: AR1544204 154-4204 154 4204
Part number: AR152-5402 ARP - Main Stud Kit to suit Ford BA-BF XR6 4.0L L6, 2-Bolt Main. Alternate part numbers: AR1525402 152-5402 152 5402
Platinum Racing Products billet titanium exhaust manifold fasteners are a new addition to our Extensive range of T5 grade titanium which are CNC ma...
View full detailsPlatinum Racing Products billet titanium Intake manifold fasteners are a new addition to our Extensive range of T5 grade titanium and are CNC machi...
View full detailsComplete Ford Barra Rocker Cover Gasket KitIncludes: Rocker cover gasket Cam solenoid seals Spark plug seals Garnish seal PCV valve seal
Athena Solid Fire Ring Head Gasket for BARRA engines, also knows as a Copper Ring Gasket. Unlike MLS head gaskets, Athena’s Solid Fire Ring gasket...
View full details$500.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}